IDES Prospector Already have an account? Login Here

IDES

InnoPlus HD8200B

High Density Polyethylene

Supplied by PTT Chemical Public Company Limited

The technical datasheet with complete property values for InnoPlus HD8200B is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
InnoPlus HD8200B is extra high molecular weight high density polyethylene blow molding grade which is recommended for 20-120 litre drums. It has excellent processability and exhibits very high impact strength, stiffness and superior environment stress crack resistance.
General  
Material Status 
  • Commercial: Active
Availability 
  • Asia Pacific
Features 
  • Food Contact Acceptable
  • High ESCR (Stress Crack Resist.)
  • High Impact Resistance
  • High Stiffness
  • Ultra High Molecular Weight
Uses 
  • Agricultural Applications
  • Drums
  
Agency Ratings 
RoHS Compliance 
Forms 
  • Pellets
Processing Method 
  • Blow Molding
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ASTM D1505
Melt Mass-Flow Rate (MFR)
     ASTM D1238
190°C/2.16 kg
g/10 min
  
190°C/21.6 kg
g/10 min
  
Environmental Stress-Cracking Resistance (25% Igepal, F50)
hr
 ASTM D1693B
Mechanical
Nominal Value
Unit
Test Method
Tensile Strength
     ASTM D638
Yield
psi
  
Break
psi
  
Tensile Elongation (Break)
%
 ASTM D638
Apparent Bending Modulus
psi
 ASTM D747
Impact
Nominal Value
Unit
Test Method
Notched Izod Impact 2
ft·lb/in
 ASTM D256
Hardness
Nominal Value
Unit
Test Method
Durometer Hardness (Shore D)
 
 ASTM D2240
Thermal
Nominal Value
Unit
Test Method
Vicat Softening Temperature
°F
 ASTM D1525 3
Melting Temperature
°F
 ASTM D2117
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: InnoPlus HD8200B, InnoPlus , InnoPlusHD8200B, HD 8200 B, HD8200B, HD8200, 8200B, Polyethylene, High Density, Polyethylene High Density, HDPE, Polyethylene, PE, PTT Chemical, PolyethyleneHighDensity, 8200HD
Features
Features may also be described by the following terms: High Impact Resistance, Ultra High Molecular Weight, Ultra High MW, High Environmental Stress Cracking Resistance, High ESCR, Stress Cracking Resistant, High Stiffness.
Agency Ratings
This plastic material has 1 certifications from the following agencies (the number in parentheses shows the number of certifications for that agency): FDA (1).
Extrusion
Nominal Value
Unit
 
Cylinder Zone 1 Temp.
°F
  
Cylinder Zone 2 Temp.
°F
  
Cylinder Zone 3 Temp.
°F
  
Cylinder Zone 4 Temp.
°F
  
Cylinder Zone 5 Temp.
°F
  
Die Temperature
°F
  
Notes
1Typical properties: these are not to be construed as specifications.
2Non break
3Rate A (50°C/h), Loading 1 (10 N)
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.