IDES Prospector Already have an account? Login Here

IDES

InnoPlus HD8100MB

High Density Polyethylene

Supplied by PTT Chemical Public Company Limited

The technical datasheet with complete property values for InnoPlus HD8100MB is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
InnoPlus HD8100M is a natural color-high density polyethylene pipe grade.
InnoPlus HD8100MB is a black compounded-high density polyethylene pipe grade which is certified as PE100. Both are bimodal resins exhibit excellent creep resistance and chemical resistance properties. They are suitable for high quality pressure pipes, produced by conventional pipe extrusion process.
General  
Material Status 
  • Commercial: Active
Availability 
  • Asia Pacific
Additive 
  • Carbon Black (20000 ppm) 1
Features 
  • Food Contact Acceptable
  • Good Chemical Resistance
  • Good Creep Resistance
Uses 
  • Piping
Agency Ratings 
 
RoHS Compliance 
Appearance 
  • Black
Forms 
  • Pellets
Processing Method 
  • Pipe Extrusion
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ASTM D1505
Melt Mass-Flow Rate (MFR)
     ASTM D1238
190°C/2.16 kg
g/10 min
  
190°C/5.0 kg
g/10 min
  
Environmental Stress-Cracking Resistance (25% Igepal, F50)
hr
 ASTM D1693B
Carbon Black Content
 
 ASTM D4218
Mechanical
Nominal Value
Unit
Test Method
Tensile Strength
     ASTM D638
Yield
psi
  
Break
psi
  
Tensile Elongation (Break)
%
 ASTM D638
Apparent Bending Modulus
psi
 ASTM D747
Flexural Modulus
psi
 ASTM D790
Impact
Nominal Value
Unit
Test Method
Notched Izod Impact 3
ft·lb/in
 ASTM D256
Hardness
Nominal Value
Unit
Test Method
Durometer Hardness (Shore D)
 
 ASTM D2240
Thermal
Nominal Value
Unit
Test Method
Vicat Softening Temperature
°F
 ASTM D1525 4
Melting Temperature
°F
 ASTM D2117
Oxidation Induction Time
min
 ASTM D3895
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: InnoPlus HD8100MB, InnoPlus , InnoPlusHD8100MB, HD 8100 MB, HD8100MB, HD8100, 8100MB, Polyethylene, High Density, Polyethylene High Density, HDPE, Polyethylene, PE, PTT Chemical, PolyethyleneHighDensity, 8100HD
Features
Features may also be described by the following terms: Good Chemical Resistance, Chemical Resistant, Good Creep Resistance, Creep Resistant.
Uses
Uses may also be described by the following terms: Piping, Pipe.
Agency Ratings
This plastic material has 2 certifications from the following agencies (the number in parentheses shows the number of certifications for that agency): FDA (1), ISO (1).
Extrusion
Nominal Value
Unit
 
Cylinder Zone 1 Temp.
°F
  
Cylinder Zone 2 Temp.
°F
  
Cylinder Zone 3 Temp.
°F
  
Cylinder Zone 4 Temp.
°F
  
Cylinder Zone 5 Temp.
°F
  
Die Temperature
°F
  
Notes
1ASTM D4218
2Typical properties: these are not to be construed as specifications.
3Non break
4Rate A (50°C/h), Loading 1 (10 N)
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.