IDES Prospector Already have an account? Login Here

IDES

Heramid® S NAT GF 030

Polyamide 6

Glass Fiber Reinforcement, 30%

Supplied by Radici Plastics

The technical datasheet with complete property values for Heramid® S NAT GF 030 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
General  
Material Status 
  • Commercial: Active
Availability 
  • Europe
Filler / Reinforcement 
  • Glass Fiber Reinforcement, 30% Filler by Weight
Appearance 
  • Natural Color
Forms 
  • Pellets
Physical
Nominal Value
Unit
Test Method
Specific Gravity
 
 ASTM D792
Molding Shrinkage - Flow
in/in
 ASTM D955
Mechanical
Nominal Value
Unit
Test Method
Tensile Modulus 2
psi
 ASTM D638
Tensile Strength 2 (Yield)
psi
 ASTM D638
Tensile Elongation 2 (Break)
%
 ASTM D638
Flexural Modulus 3
psi
 ASTM D790
Flexural Strength 3
psi
 ASTM D790
Impact
Nominal Value
Unit
Test Method
Unnotched Izod Impact Strength
ft·lb/in²
 Internal Method
Thermal
Nominal Value
Unit
Test Method
Deflection Temperature Under Load
     ASTM D648
66 psi, Unannealed
°F
  
264 psi, Unannealed
°F
  
Vicat Softening Temperature
°F
 ASTM D1525 4
Melting Temperature (DSC) 5
°F
 ISO 3146
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Heramid® S NAT GF 030, Heramid S NAT GF 030, Heramid® , Heramid, HeramidSNATGF030, S NAT GF 030, SNAT, NATGF, GF030, SNATGF030, Polyamide 6, Nylon 6, Polyamide, Nylon, pa6, Radici Plastics, Polyamide6, Nylon6, NATS
Generic Name
Generic Name may also be described by the following terms: PA6.
Notes
1Typical properties: these are not to be construed as specifications.
20.20 in/min
30.11 in/min
4Rate A (50°C/h), Loading 2 (50 N)
5C2, Scanning rate 10°C / min.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.