Already have an account? Login Here

IDES

Heramid® S NAT GF050

Polyamide 6

Glass Fiber Reinforcement, 50%

Supplied by Radici Plastics

The technical datasheet with complete property values for Heramid® S NAT GF050 is available to members of the Prospector Plastics Database.
Register to view full datasheet.

General
Material Status	Commercial: Active
Availability	Europe
Filler / Reinforcement	Glass Fiber Reinforcement, 50% Filler by Weight
Appearance	Natural Color
Forms	Pellets

Physical	Nominal Value	Unit	Test Method
Density		g/cm³	ISO 1183
Mechanical	Nominal Value	Unit	Test Method
Tensile Modulus		psi	ISO 527-2/1A/1
Tensile Stress (Yield)		psi	ISO 527-2/1A/50
Nominal Tensile Strain at Break		%	ISO 527-2/1A/50
Flexural Modulus²		psi	ISO 178
Flexural Strength²		psi	ISO 178
Impact	Nominal Value	Unit	Test Method
Charpy Notched Impact Strength		ft·lb/in²	ISO 179/1A
Charpy Unnotched Impact Strength		ft·lb/in²	ISO 179/1eU
Thermal	Nominal Value	Unit	Test Method
Heat Deflection Temperature (264 psi, Unannealed)		°F	ISO 75-2/A
Melting Temperature (DSC)³		°F	ISO 3146
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Heramid® S NAT GF050, Heramid S NAT GF050, Heramid® , Heramid, HeramidSNATGF050, S NAT GF 050, S NAT GF050, SNAT, NATGF, GF050, SNATGF050, Polyamide 6, Nylon 6, Polyamide, Nylon, pa6, Radici Plastics, Polyamide6, Nylon6, NATS
Generic Name
Generic Name may also be described by the following terms: PA6.

Notes

¹Typical properties: these are not to be construed as specifications.

²Type 1A, 0.079 in/min

³C2, Scanning rate 10°C/min

Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.