IDES Prospector Already have an account? Login Here

IDES

Heramid® S NAT MP/1

Polyamide 6

Supplied by Radici Plastics

The technical datasheet with complete property values for Heramid® S NAT MP/1 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
General  
Material Status 
  • Commercial: Active
Availability 
  • Europe
Appearance 
  • Natural Color
Forms 
  • Pellets
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ISO 1183
Mechanical
Nominal Value
Unit
Test Method
Tensile Modulus
psi
 ISO 527-2/1A/1
Tensile Stress (Yield)
psi
 ISO 527-2/1A/50
Nominal Tensile Strain at Break
%
 ISO 527-2/1A/50
Flexural Modulus 2
psi
 ISO 178
Flexural Strength 2
psi
 ISO 178
Impact
Nominal Value
Unit
Test Method
Charpy Notched Impact Strength
ft·lb/in²
 ISO 179/1A
Charpy Unnotched Impact Strength
 
 ISO 179/1eU
Thermal
Nominal Value
Unit
Test Method
Heat Deflection Temperature (264 psi, Unannealed)
°F
 ISO 75-2/A
Melting Temperature (DSC) 3
°F
 ISO 3146
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Heramid® S NAT MP/1, Heramid S NAT MP1, Heramid® , Heramid, HeramidSNATMP1, S NAT MP, SNATMP, S NAT MP/1, S NAT MP1, S NAT MP:1, S NAT MP+1, S NAT MP-1, S NAT MP_1, S NAT MP 1, SNAT, NATMP, MP1, SNATMP1, SNATMP_1, Polyamide 6, Nylon 6, Polyamide, Nylon, pa6, Radici Plastics, Polyamide6, Nylon6, NATS
Generic Name
Generic Name may also be described by the following terms: PA6.
Notes
1Typical properties: these are not to be construed as specifications.
2Type 1A, 0.079 in/min
3C2, Scanning rate 10°C/min
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.