IDES Prospector Already have an account? Login Here

IDES

Radilon® A BF 990 GRI

Polyamide 66

Supplied by Radici Plastics

The technical datasheet with complete property values for Radilon® A BF 990 GRI is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
General  
Material Status 
  • Commercial: Active
Availability 
  • Africa & Middle East
  • Asia Pacific
  • Europe
  • North America
  • South America
Forms 
  • Pellets
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ISO 1183
Mechanical
Nominal Value
Unit
Test Method
Tensile Modulus
psi
 ISO 527-2/1A/1
Tensile Stress (Yield)
psi
 ISO 527-2/1A/50
Tensile Strain (Yield)
%
 ISO 527-2/1A/50
Nominal Tensile Strain at Break
%
 ISO 527-2/1A/50
Flexural Modulus 2
psi
 ISO 178
Flexural Strength 2
psi
 ISO 178
Impact
Nominal Value
Unit
Test Method
Charpy Notched Impact Strength
ft·lb/in²
 ISO 179/eA
Thermal
Nominal Value
Unit
Test Method
Heat Deflection Temperature (264 psi, Unannealed)
°F
 ISO 75-2/Af
Vicat Softening Temperature
°F
 ISO 306/B50
Melting Temperature (DSC) 3
°F
 ISO 3146
Flammability
Nominal Value
Unit
Test Method
Flame Rating - UL (0.0315 in)
 
 UL 94
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Radilon® A BF 990 GRI, Radilon A BF 990 GRI, Radilon® , Radilon, RadilonABF990GRI, A BF 990 GRI, ABF, BF990, 990GRI, ABF990GRI, Polyamide 66, Nylon 66, Polyamide, Nylon, pa66, Radici Plastics, Polyamide66, Nylon66, BFA
Generic Name
Generic Name may also be described by the following terms: PA66.
Notes
1Typical properties: these are not to be construed as specifications.
2Type 1A, 0.079 in/min
3C2, Scanning rate 10°C/min
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.