IDES Prospector Already have an account? Login Here

IDES

Daploy™ WB180HMS

Polypropylene

Supplied by Borealis AG

The technical datasheet with complete property values for Daploy™ WB180HMS is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
Daploy WB180HMS is a propylene-based, structurally isomeric polymer.

Special features
  • High melt strength
  • Combination of high strength and drawability in the melt phase
  • High service temperature
  • High stiffness
  • High chemical resistance
  • Good recyclability
  • Good moisture barrier properties
General  
Material Status 
  • Commercial: Active
Availability 
  • Europe
  • North America
  • South America
Features 
  • Good Chemical Resistance
  • Good Drawdown
  • Good Melt Strength
  • High Stiffness
  • High Strength
  • Moisture Barrier
  • Recyclable Material
Appearance 
  • Natural Color
Forms 
  • Granules
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ISO 1183
Melt Mass-Flow Rate (MFR) (230°C/2.16 kg)
g/10 min
 ISO 1133
Mechanical
Nominal Value
Unit
Test Method
Tensile Modulus (73°F, Injection Molded)
psi
 ISO 527-2/1
Tensile Strain (Yield, 73°F, Injection Molded)
%
 ISO 527-2
Flexural Modulus 2 (73°F, Injection Molded)
psi
 ISO 178
Impact
Nominal Value
Unit
Test Method
Charpy Notched Impact Strength (73°F)
ft·lb/in²
 ISO 179/1eA
Thermal
Nominal Value
Unit
Test Method
Vicat Softening Temperature
°F
 ISO 306/A50
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Daploy™ WB180HMS, Daploy WB180HMS, Daploy™ , Daploy, DaployWB180HMS, WB 180 HMS, WB180HMS, WB180, 180HMS, Polypropylene, Unspecified, Polypropylene Unspecified, PP, Unspecified, PP Unspecified, Polypropylene, PP, Borealis, PolypropyleneUnspecified, PPUnspecified, 180WB
Generic Name
Generic Name may also be described by the following terms: Polypropilene, Polypropelene.
Features
Features may also be described by the following terms: Good Drawdown, Good draw down, High Strength, High Stiffness, Good Melt Strength, Moisture Barrier, Good Chemical Resistance, Chemical Resistant.
Notes
1Typical properties: these are not to be construed as specifications.
20.079 in/min
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.