Already have an account? Login Here

IDES

Mafill® CT 4200

Polypropylene Copolymer

Talc Filler, 20%

Supplied by Ravago Group

The technical datasheet with complete property values for Mafill® CT 4200 is available to members of the Prospector Plastics Database.
Register to view full datasheet.

Product Description
PPC, V0, 20% talc filled
General
Material Status	Commercial: Active
Availability	Europe
Filler / Reinforcement	Talc Filler, 20% Filler by Weight
Recycled Content	Yes
Features	Copolymer
Forms	Pellets

Physical	Nominal Value	Unit	Test Method
Density		g/cm³	ISO 1183
Melt Mass-Flow Rate (MFR) (230°C/2.16 kg)		g/10 min	ISO 1133
Molding Shrinkage		%	ISO 2577
Mechanical	Nominal Value	Unit	Test Method
Tensile Stress (Yield)		psi	ISO 527-2/50
Flexural Modulus		psi	ISO 178
Impact	Nominal Value	Unit	Test Method
Notched Izod Impact (73°F)		ft·lb/in	ASTM D256
Thermal	Nominal Value	Unit	Test Method
Heat Deflection Temperature (264 psi, Unannealed)		°F	ISO 75-2/A
Vicat Softening Temperature		°F	ISO 306/B50
Flammability	Nominal Value	Unit	Test Method
Flame Rating - UL			UL 94
0.0630 in²
0.126 in
Glow Wire Flammability Index		°F	IEC 60695-2-12
Needle Flame Test			IEC 60695-2-2
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Mafill® CT 4200, Mafill CT 4200, Mafill® , Mafill, MafillCT4200, CT 4200, CT4200, Polypropylene Copolymer, PP Copolymer, Polypropylene, PP, Ravago, PolypropyleneCopolymer, PPCopolymer, 4200CT

Notes

¹Typical properties: these are not to be construed as specifications.

²tested internally

Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.