IDES Prospector Already have an account? Login Here

IDES

Mafill® HT 4210

Polypropylene Homopolymer

Talc Filler, 20%

Supplied by Ravago Group

The technical datasheet with complete property values for Mafill® HT 4210 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
PPH compound, 20% talcum, V0, without DECA-BDE
General  
Material Status 
  • Commercial: Active
Availability 
  • Europe
Filler / Reinforcement 
  • Talc Filler, 20% Filler by Weight
Recycled Content 
  • Yes
Features 
  • Homopolymer
Forms 
  • Pellets
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ISO 1183
Melt Mass-Flow Rate (MFR) (230°C/2.16 kg)
g/10 min
 ISO 1133
Molding Shrinkage
%
 ISO 2577
Mechanical
Nominal Value
Unit
Test Method
Tensile Stress (Yield)
psi
 ISO 527-2/50
Flexural Modulus
psi
 ISO 178
Impact
Nominal Value
Unit
Test Method
Notched Izod Impact (73°F)
ft·lb/in
 ASTM D256
Thermal
Nominal Value
Unit
Test Method
Heat Deflection Temperature (264 psi, Unannealed)
°F
 ISO 75-2/A
Vicat Softening Temperature
°F
 ISO 306/B50
Flammability
Nominal Value
Unit
Test Method
Flame Rating - UL
     UL 94
0.0630 in 2
 
  
0.126 in
 
  
Glow Wire Flammability Index
°F
 IEC 60695-2-12
Needle Flame Test
 
 IEC 60695-2-2
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Mafill® HT 4210, Mafill HT 4210, Mafill® , Mafill, MafillHT4210, HT 4210, HT4210, Polypropylene Homopolymer, PP Homopolymer, Polypropylene, PP, Ravago, PolypropyleneHomopolymer, PPHomopolymer, 4210HT
Notes
1Typical properties: these are not to be construed as specifications.
2tested internally
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.