IDES Prospector Already have an account? Login Here

IDES

Vipel® F010-TBP-25

Vinyl Ester

Supplied by AOC, L.L.C.

The technical datasheet with complete property values for Vipel® F010-TBP-25 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
Vipel Corrosion Resistant Bisphenol A, Epoxy Vinyl Ester Resins

AOC's Vipel F010 series is a bisphenol A epoxy-based vinyl ester resin dissolved in styrene. The Vipel F010 series is ideally suited for use in hand lay-up, sprayup, filament winding, SMC, and pultrusion processes where outstanding mechanical properties and excellent resistance to chemicals and heat are required.

Versatile
Wide formulating capabilities allow for use in many processes and for optimization
of cost/performance. Unique composition produces a tough and versatile resin with excellent crack
and craze resistance in molded parts. Vipel F010 is suitable for moldings that are subjected to particularly high static or dynamic loads, such as pipe, tanks, duct work and flooring applications. Vinyl ester resins have excellent resistance to sustained heat.

Corrosion Resistant
Vipel F010 highly resistant to hydrogen peroxide, and alkalis, and performs well in various stages of hypochlorite and chlorine production. Refer to AOC's "Corrosion Resistant Resin Guide" for corrosion resistance information or for questions regarding suitability of a resin to any particular chemical environment contact AOC.

Food and Drug
All resins in this datasheet are manufactured from raw materials that are listed in FDA regulation Title 21 CFR 177.2420. It is the fabricator's responsibility to also be sure that the final composite is well cured. All composites used for FDA applications should be post cured at 180°F/82°C for at least 4 hours. After post curing it should be washed with soap and water and rinsed.
General  
Material Status 
  • Commercial: Active
Availability 
  • Africa & Middle East
  • Asia Pacific
  • Europe
  • Latin America
  • North America
  • South America
Features 
  • Alkali Resistant
  • Food Contact Acceptable
  • Good Corrosion Resistance
  • High Heat Resistance
 
Uses 
  • Flooring Maintenance/Repair
  • Piping
  • Plumbing Parts
  • Tanks
 
Agency Ratings 
Forms 
  • Liquid
Processing Method 
  • Filament Winding
  • Hand Lay-up
  • Pultrusion
  • Spraying
 
Physical
Nominal Value
Unit
Test Method
Specific Gravity
 
 
Styrene Content
%
 
Mechanical
Nominal Value
Unit
Test Method
Tensile Modulus
psi
ASTM D638
Tensile Strength (Yield)
psi
ASTM D638
Tensile Elongation (Break)
%
ASTM D638
Flexural Modulus
psi
ASTM D790
Flexural Strength
psi
ASTM D790
Hardness
Nominal Value
Unit
Test Method
Barcol Hardness
 
ASTM D2583
Thermal
Nominal Value
Unit
Test Method
Deflection Temperature Under Load (264 psi, Unannealed)
°F
ASTM D648
Glass Transition Temperature (DSC)
°F
DIN 53445
Electrical
Nominal Value
Unit
Test Method
Surface Resistivity
ohm
DIN 53482
Volume Resistivity 2
ohm·cm
DIN 53482
Dielectric Constant
    DIN 53483
60 Hz 2
 
 
60 Hz 3
 
 
1 kHz 2
 
 
1 kHz 3
 
 
1 MHz 2
 
 
1 MHz 3
 
 
Dissipation Factor
    DIN 53483
60 Hz 2
 
 
60 Hz 3
 
 
1 kHz 2
 
 
1 kHz 3
 
 
1 MHz 2
 
 
1 MHz 3
 
 
Electric Strength (0.0276 in)
V/mil
DIN 53481
Thermoset
Nominal Value
Unit
Test Method
Thermoset Mix Viscosity 4 (77°F)
cP
 
Post Cure Time (180°F)
hr
 
Exotherm
     
Gel to Peak
min
 
Peak
°F
 
Gel Time 5 (77°F)
min
 
Additional Information
Nominal Value
Unit
Test Method
Critical Strain Energy
ft·lb/in²
ASTM E399
Stress Intensity Factor
 
ASTM E399
Thixotropic Index 6
 
 
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Vipel® F010-TBP-25, Vipel F010TBP25, Vipel® , Vipel, VipelF010TBP25, F 010, F 010 TBP 25, F010-TBP-25, F010TBP25, F010:TBP:25, F010/TBP/25, F010+TBP+25, F010_TBP_25, F010 TBP 25, F010, 010TBP, TBP25, Vinyl Ester, Epoxy, AOC, VinylEster, 010F
Features
Features may also be described by the following terms: Good Corrosion Resistance, Corrosion Resistant, High Heat Resistance.
Uses
Uses may also be described by the following terms: Piping, Pipe, Flooring Maintenance, Flooring Repair, Floor Maintenance, Floor Repair.
Agency Ratings
This plastic material has 1 certifications from the following agencies (the number in parentheses shows the number of certifications for that agency): FDA (1).
Notes
1Typical properties: these are not to be construed as specifications.
2after 24 hrs in drinking water
3Dry
4Brookfield LV viscosity spindle 3 at 60 rpm
5Gel time 1.0% MEKP
66/60 Thix Index
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.