IDES Prospector Already have an account? Login Here

IDES

Vipel® F085-HAA-00

Vinyl Ester

Supplied by AOC, L.L.C.

The technical datasheet with complete property values for Vipel® F085-HAA-00 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
Vipel Corrosion Resistant Epoxy Novolac, Vinyl Ester Resin

The Vipel F085 series is an epoxy novolac vinyl ester resin dissolved in styrene. The Vipel F085 series is ideally suited for applications where outstanding mechanical properties and resistance to chemicals, oxidation and heat are required.

Corrosion resistance
The epoxy novolac backbone chemistry provides resistance to acids and bases and has superior resistance to many organic solvents. Vipel F085 series is generally resistant to liquids and vapors at higher temperatures than standard bisphenol-A epoxy vinyl ester resins.

The Vipel F085 series is well suited for use in the field of chlorine-alkali electrolysis. Refer to AOC's "Corrosion Resistant Resin Guide" for corrosion resistance information or for questions regarding suitability of a resin to any particular chemical environment contact AOC.

Mechanical Properties
The Vipel F085 series is suitable for moldings that are subjected to particularly high static and dynamic loads. It is resistant to internal stress cracking under high loading.

Versatile
Suitable for various fabricating methods such as hand lay-up, filament winding, etc.
General  
Material Status 
  • Commercial: Active
Availability 
  • Africa & Middle East
  • Asia Pacific
  • Europe
  • Latin America
  • North America
  • South America
Features 
  • Acid Resistant
  • Base Resistant
  • Good Chemical Resistance
  • Good Corrosion Resistance
  • High ESCR (Stress Crack Resist.)
  • High Heat Resistance
  • Oxidation Resistant
  • Solvent Resistant
Uses 
  • Filaments
Forms 
  • Liquid
Processing Method 
  • Filament Winding
  • Hand Lay-up
  
Physical
Nominal Value
Unit
Test Method
Specific Gravity
 
  
Styrene Content
%
  
Mechanical
Nominal Value
Unit
Test Method
Tensile Modulus
psi
 ASTM D638
Tensile Strength (Yield)
psi
 ASTM D638
Tensile Elongation (Break)
%
 ASTM D638
Flexural Modulus
psi
 ASTM D790
Flexural Strength
psi
 ASTM D790
Hardness
Nominal Value
Unit
Test Method
Barcol Hardness
 
 ASTM D2583
Thermal
Nominal Value
Unit
Test Method
Deflection Temperature Under Load (264 psi, Unannealed)
°F
 ASTM D648
Thermoset
Nominal Value
Unit
Test Method
Thermoset Mix Viscosity 2 (77°F)
cP
  
Exotherm
      
Gel to Peak
min
  
Peak
°F
  
Gel Time 3 (180°F)
min
  
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Vipel® F085-HAA-00, Vipel F085HAA00, Vipel® , Vipel, VipelF085HAA00, F 085, F 085 HAA 00, F085-HAA-00, F085HAA00, F085:HAA:00, F085/HAA/00, F085+HAA+00, F085_HAA_00, F085 HAA 00, F085, 085HAA, HAA00, Vinyl Ester, Epoxy, AOC, VinylEster, 085F
Features
Features may also be described by the following terms: Good Chemical Resistance, Chemical Resistant, Good Corrosion Resistance, Corrosion Resistant, High Heat Resistance, High Environmental Stress Cracking Resistance, High ESCR, Stress Cracking Resistant.
Notes
1Typical properties: these are not to be construed as specifications.
2Brookfield RV viscosity spindle #3 AT 20 rpm
3SPI gel with 1.0% BPO
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.