IDES Prospector Already have an account? Login Here

IDES

ASI POLYETHYLENE CP 851

Low Density Polyethylene

Supplied by A. Schulman Inc.

The technical datasheet with complete property values for ASI POLYETHYLENE CP 851 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
CP 851 is a high flow injection-molding grade of conventional (high pressure) low density polyethylene. This material meets the specifications in FDA Regulation 21 CFR 177.1520, (c)3.1.
General  
Material Status 
  • Commercial: Active
Availability 
  • Asia Pacific
  • North America
 
Features 
  • Food Contact Acceptable
  • High Flow
 
Agency Ratings 
Processing Method 
  • Compounding
  • Injection Molding
 
Physical
Nominal Value
Unit
Test Method
Specific Gravity
 
ASTM D792
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg)
g/10 min
ASTM D1238
Mechanical
Nominal Value
Unit
Test Method
Tensile Strength (Yield)
psi
ASTM D638
Tensile Elongation (Break)
%
ASTM D638
Apparent Bending Modulus
psi
ASTM D747
Hardness
Nominal Value
Unit
Test Method
Durometer Hardness
 
ASTM D1706
Thermal
Nominal Value
Unit
Test Method
Vicat Softening Temperature
°F
ASTM D1525
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: ASI POLYETHYLENE CP 851, ASI POLYETHYLENE , ASIPOLYETHYLENECP851, ASIPOLYETHYLENE, POLYETHYLENECP 851, POLYETHYLENE, POLYETHYLENECP851, CP 851, CP851, Polyethylene, Low Density, Polyethylene Low Density, LDPE, PE, A. Schulman, PolyethyleneLowDensity, 851CP, 851POLYETHYLENECP
Features
Features may also be described by the following terms: High Flow, High Melt, High MFI.
Agency Ratings
This plastic material has 1 certifications from the following agencies (the number in parentheses shows the number of certifications for that agency): FDA (1).
Notes
1Typical properties: these are not to be construed as specifications.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.