IDES Prospector Already have an account? Login Here

IDES

Lanufene HBD-5101

High Density Polyethylene

Supplied by Ras Lanuf Oil & Gas Processing Company (RASCO)

The technical datasheet with complete property values for Lanufene HBD-5101 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
LANUFENE HDB 5101 is a high density polyethylene resin intended for use primarily in blow molding applications.
LANUFENE HDB 5101 combines excellent environmental stress cracking resistance (ESCR) and toughness with good process-ability and melt strength.

LANUFENE HDB 5101 is recommended for blow molding of large bottles, pails, containers, water storage drums, and chemical shipping containers where good ESCR and toughness are needed.
LANUFENE HDB 5101 can be used in pipes application such as portable water distribution pipes, irrigation pipes, conduit pipes, etc.
General  
Material Status 
  • Commercial: Active
Availability 
  • Africa & Middle East
  • Europe
  
Features 
  • Food Contact Acceptable
  • Good Melt Strength
  • Good Processability
  • Good Toughness
  • High ESCR (Stress Crack Resist.)
Uses 
  • Blow Molding Applications
  • Bottles
  • Containers
  • Drums
  • Pails
  • Piping
Forms 
  • Pellets
Processing Method 
  • Blow Molding
  • Extrusion Blow Molding
  
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ASTM D1505
Melt Mass-Flow Rate (MFR)
     ASTM D1238
190°C/2.16 kg
g/10 min
  
190°C/21.6 kg
g/10 min
  
Environmental Stress-Cracking Resistance (F50)
hr
 ASTM D1693
Mechanical
Nominal Value
Unit
Test Method
Tensile Strength (Ultimate)
psi
 ASTM D638
Tensile Elongation (Break)
%
 ASTM D638
Flexural Modulus
psi
 ASTM D790
Impact
Nominal Value
Unit
Test Method
Notched Izod Impact
ft·lb/in
 ASTM D256A
Thermal
Nominal Value
Unit
Test Method
Brittleness Temperature
°F
 ASTM D746
Vicat Softening Temperature
°F
 ASTM D1525
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Lanufene HBD-5101, Lanufene HBD5101, Lanufene , LanufeneHBD5101, HBD, HBD-5101, HBD5101, HBD:5101, HBD/5101, HBD+5101, HBD_5101, HBD 5101, Polyethylene, High Density, Polyethylene High Density, HDPE, Polyethylene, PE, RASCO, PolyethyleneHighDensity, 5101HBD
Features
Features may also be described by the following terms: High Environmental Stress Cracking Resistance, High ESCR, Stress Cracking Resistant, Good Toughness, Tough, Good Melt Strength, Good Processability, Easy Processing.
Uses
Uses may also be described by the following terms: Piping, Pipe.
Extrusion
Nominal Value
Unit
 
Melt Temperature
°F
  
Notes
1Typical properties: these are not to be construed as specifications.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.