IDES Prospector Already have an account? Login Here

IDES

SABIC® STAMAX 40YM240

Polypropylene

Long Glass Fiber, 40%

Supplied by SABIC Innovative Plastics

The technical datasheet with complete property values for SABIC® STAMAX 40YM240 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
SABIC® STAMAX 40YM240 is a 40% long glass fiber reinforced grade. The glass fibres are chemically coupled to the PP matrix, resulting in high stiffness and strength.

The pellet size of SABIC® STAMAX 40YM240 is 12 mm
General  
Material Status 
  • Commercial: Active
Availability 
  • North America
Filler / Reinforcement 
  • Long Glass Fiber, 40% Filler by Weight
Features 
  • Chemically Coupled
  • High Stiffness
  • High Strength
Automotive Specifications 
 
Forms 
  • Pellets
Processing Method 
  • Injection Molding
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ISO 1183
Mechanical
Nominal Value
Unit
Test Method
Tensile Modulus
     ISO 527-2/1B
73°F, Injection Molded
psi
  
176°F, Injection Molded
psi
  
248°F, Injection Molded
psi
  
Tensile Stress
     ISO 527-2/1B
Yield, 73°F, Injection Molded
psi
  
Yield, 176°F, Injection Molded
psi
  
Yield, 248°F, Injection Molded
psi
  
Tensile Strain (Break, 73°F, Injection Molded)
%
 ISO 527-2/1B
Flexural Modulus
     ISO 178
73°F, Injection Molded
psi
  
176°F, Injection Molded
psi
  
Flexural Strength
     ISO 178
176°F, Injection Molded
psi
  
73°F, Injection Molded
psi
  
Impact
Nominal Value
Unit
Test Method
Charpy Notched Impact Strength
     ISO 179/1eA
-22°F, Injection Molded
ft·lb/in²
  
73°F, Injection Molded
ft·lb/in²
  
Charpy Unnotched Impact Strength (-22°F, Injection Molded)
ft·lb/in²
 ISO 179/1eU
Thermal
Nominal Value
Unit
Test Method
Heat Deflection Temperature (264 psi, Unannealed)
°F
 ISO 75-2/A
CLTE - Flow
     ASTM D696
-22 to 86°F
in/in/°F
  
73 to 176°F
in/in/°F
  
Related Terminology
This supplier and product may also be known by these terms: GE Plastics, LNP Engineering Plastics, GE Polymerland

Product names can be difficult to match. You may have searched any one of these terms to find this product: SABIC® STAMAX 40YM240, SABIC STAMAX 40YM240, SABIC® STAMAX , SABIC STAMAX, SABICSTAMAX40YM240, SABICSTAMAX, STAMAX 40 YM 240, STAMAX40YM240, STAMAX40, STAMAX, 40 YM 240, 40YM240, 40YM, YM240, Polypropylene, Unspecified, Polypropylene Unspecified, PP, Unspecified, PP Unspecified, Polypropylene, PP, SABIC IP, PolypropyleneUnspecified, PPUnspecified, YM40, 40STAMAX
Generic Name
Generic Name may also be described by the following terms: Polypropilene, Polypropelene.
Features
Features may also be described by the following terms: High Strength, High Stiffness.
Automotive Specifications
This plastic material has approval for 2 automotive specifications from the following agencies (the number in parentheses shows the number of specifications for that agency): IMDS (1), PSA Peugeot-Citroën (1).
Notes
1Typical properties: these are not to be construed as specifications.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.