IDES Prospector Already have an account? Login Here

IDES

INNOPOL® PP CS 1-1240

Polypropylene Homopolymer

Chalk Filler, 42%

Supplied by Inno-Comp Ltd.

The technical datasheet with complete property values for INNOPOL® PP CS 1-1240 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
INNOPOL® CS 1-1240 is a 42 % chalk -filled polypropylene homopolymer compound /PP-H KD42 (ISO 1043)/. This grade is available in nature and custom coloured form.

INNOPOL® CS 1-1240 is developed for producing injection moulded components for household equipments.
General  
Material Status 
  • Commercial: Active
Availability 
  • Europe
Filler / Reinforcement 
  • Chalk Filler, 42% Filler by Weight
Features 
  • Homopolymer
Uses 
  • Hospital Goods
Appearance 
  • Colors Available
  • Natural Color
 
Forms 
  • Pellets
Processing Method 
  • Injection Molding
Resin ID (ISO 1043)
  • PP-H KD42
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
ISO 1183
Melt Mass-Flow Rate (MFR) (230°C/2.16 kg)
g/10 min
ISO 1133
Ash Content (1652°F)
%
ISO 3451-1
Mechanical
Nominal Value
Unit
Test Method
Tensile Modulus
psi
ISO 527-2/1
Tensile Stress (Yield)
psi
ISO 527-2/50
Tensile Strain (Yield)
%
ISO 527-2/50
Flexural Modulus 2
psi
ISO 178
Impact
Nominal Value
Unit
Test Method
Charpy Notched Impact Strength
    ISO 179/1eA
-4°F
ft·lb/in²
 
73°F
ft·lb/in²
 
Thermal
Nominal Value
Unit
Test Method
Heat Deflection Temperature (66 psi, Unannealed)
°F
ISO 75-2/B
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: INNOPOL® PP CS 1-1240, INNOPOL PP CS 11240, INNOPOL® PP , INNOPOL PP, INNOPOLPPCS11240, INNOPOLPP, CS 1, PPCS 1-1240, PPCS 11240, PPCS 1:1240, PPCS 1/1240, PPCS 1+1240, PPCS 1_1240, PPCS 1 1240, PPCS1, PPCS 1, PPCS11240, CS 1-1240, CS 11240, CS 1:1240, CS 1/1240, CS 1+1240, CS 1_1240, CS 1 1240, CS1, 11240, PPCS1_1240, CS11240, CS1_1240, Polypropylene Homopolymer, PP Homopolymer, Polypropylene, PP, Inno-Comp, PolypropyleneHomopolymer, PPHomopolymer, 1CS, 1PPCS
Injection
Nominal Value
Unit
 
Drying Temperature
°F
 
Drying Time
hr
 
Suggested Max Moisture
%
 
Rear Temperature
°F
 
Middle Temperature
°F
 
Front Temperature
°F
 
Processing (Melt) Temp
°F
 
Mold Temperature
°F
 
Injection Rate
 
 
Injection Notes
Hold pressure: 30 to 80 % of actual injection pressure
Notes
1Typical properties: these are not to be construed as specifications.
20.079 in/min
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.