INNOPOL PP CS 1-3140 Inno-Comp Polypropylene Homopolymer (Talc Filler, 40%)

Product Description

INNOPOL® CS 1-3140 is a 40 % talc-filled polypropylene homopolymer compound. This grade is available in nature and custom coloured form.

INNOPOL® CS 1-3140 is recommended especially for producing products, where high stiffness, low shrinkage, long term heat stability and good processability are required.

General

Material Status

Commercial: Active

Availability

Europe

Filler / Reinforcement

Talc Filler, 40% Filler by Weight

Features

Good Heat Aging Resistance

Good Processability

High Stiffness

Homopolymer

Low Shrinkage

Appearance

Colors Available

Natural Color

Forms

Pellets

Processing Method

Injection Molding

Resin ID (ISO 1043)

PP-H TD40

Physical	Nominal Value	Unit	Test Method
Density		g/cm³	ISO 1183
Melt Mass-Flow Rate (MFR) (230°C/2.16 kg)		g/10 min	ISO 1133
Mechanical	Nominal Value	Unit	Test Method
Tensile Modulus		psi	ISO 527-2/1
Tensile Stress (Yield)		psi	ISO 527-2/50
Tensile Strain (Yield)		%	ISO 527-2/50
Flexural Modulus²		psi	ISO 178
Impact	Nominal Value	Unit	Test Method
Charpy Notched Impact Strength			ISO 179/1eA
-4°F		ft·lb/in²
73°F		ft·lb/in²
Thermal	Nominal Value	Unit	Test Method
Heat Deflection Temperature
66 psi, Unannealed		°F	ISO 75-2/B
264 psi, Unannealed		°F	ISO 75-2/A
Flammability	Nominal Value	Unit	Test Method
Flame Rating - UL (0.0630 in)			FMVSS 302
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: INNOPOL® PP CS 1-3140, INNOPOL PP CS 13140, INNOPOL® PP , INNOPOL PP, INNOPOLPPCS13140, INNOPOLPP, CS 1, PPCS 1-3140, PPCS 13140, PPCS 1:3140, PPCS 1/3140, PPCS 1+3140, PPCS 1_3140, PPCS 1 3140, PPCS1, PPCS 1, PPCS13140, CS 1-3140, CS 13140, CS 1:3140, CS 1/3140, CS 1+3140, CS 1_3140, CS 1 3140, CS1, 13140, PPCS1_3140, CS13140, CS1_3140, Polypropylene Homopolymer, PP Homopolymer, Polypropylene, PP, Inno-Comp, PolypropyleneHomopolymer, PPHomopolymer, 1CS, 1PPCS
Features
Features may also be described by the following terms: Good Heat Aging Resistance, Good Processability, Easy Processing, Low Shrinkage, High Stiffness.

Injection	Nominal Value	Unit
Drying Temperature		°F
Drying Time		hr
Suggested Max Moisture		%
Rear Temperature		°F
Middle Temperature		°F
Front Temperature		°F
Processing (Melt) Temp		°F
Mold Temperature		°F
Injection Rate
Injection Notes
Hold pressure: 30 to 100 % of actual injection pressure

INNOPOL® PP CS 1-3140

Polypropylene Homopolymer

Talc Filler, 40%

Supplied by Inno-Comp Ltd.