IDES Prospector Already have an account? Login Here

IDES

INNOPOL® PP CS 1-3250

Polypropylene Homopolymer

Chalk Filler, 42%

Supplied by Inno-Comp Ltd.

The technical datasheet with complete property values for INNOPOL® PP CS 1-3250 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
INNOPOL® CS 1-3250 is a 42 % chalk-filled polypropylene homopolymer compound /PP-H KD42 (ISO 1043)/. This grade is available in nature and custom coloured form.

INNOPOL® CS 1-3250 is developed for producing injection moulded components for household equipments.
General  
Material Status 
  • Commercial: Active
Availability 
  • Europe
Filler / Reinforcement 
  • Chalk Filler, 42% Filler by Weight
Features 
  • Homopolymer
Uses 
  • Household Goods
Appearance 
  • Colors Available
  • Natural Color
  
Forms 
  • Pellets
Processing Method 
  • Injection Molding
Resin ID (ISO 1043)
  • PP-H KD42
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ISO 1183
Melt Mass-Flow Rate (MFR) (230°C/2.16 kg)
g/10 min
 ISO 1133
Ash Content (1652°F)
%
 ISO 3451-1
Mechanical
Nominal Value
Unit
Test Method
Tensile Modulus
psi
 ISO 527-2/1
Tensile Stress (Yield)
psi
 ISO 527-2/50
Tensile Strain (Yield)
%
 ISO 527-2/50
Flexural Modulus 2
psi
 ISO 178
Impact
Nominal Value
Unit
Test Method
Charpy Notched Impact Strength
     ISO 179/1eA
-4°F
ft·lb/in²
  
73°F
ft·lb/in²
  
Thermal
Nominal Value
Unit
Test Method
Heat Deflection Temperature (66 psi, Unannealed)
°F
 ISO 75-2/B
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: INNOPOL® PP CS 1-3250, INNOPOL PP CS 13250, INNOPOL® PP , INNOPOL PP, INNOPOLPPCS13250, INNOPOLPP, CS 1, PPCS 1-3250, PPCS 13250, PPCS 1:3250, PPCS 1/3250, PPCS 1+3250, PPCS 1_3250, PPCS 1 3250, PPCS1, PPCS 1, PPCS13250, CS 1-3250, CS 13250, CS 1:3250, CS 1/3250, CS 1+3250, CS 1_3250, CS 1 3250, CS1, 13250, PPCS1_3250, CS13250, CS1_3250, Polypropylene Homopolymer, PP Homopolymer, Polypropylene, PP, Inno-Comp, PolypropyleneHomopolymer, PPHomopolymer, 1CS, 1PPCS
Uses
Uses may also be described by the following terms: Household Goods, Housewares.
Injection
Nominal Value
Unit
 
Drying Temperature
°F
  
Drying Time
hr
  
Suggested Max Moisture
%
  
Rear Temperature
°F
  
Middle Temperature
°F
  
Front Temperature
°F
  
Processing (Melt) Temp
°F
  
Mold Temperature
°F
  
Injection Rate
 
  
Injection Notes
Hold pressure: 30 to 80 % of actual injection pressure
Notes
1Typical properties: these are not to be construed as specifications.
20.079 in/min
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.