IDES Prospector Already have an account? Login Here

IDES

INNOPOL® PP CS 1-5120 BLH

Polypropylene Homopolymer

Talc Filler, 20%

Supplied by Inno-Comp Ltd.

The technical datasheet with complete property values for INNOPOL® PP CS 1-5120 BLH is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
INNOPOL® CS 1-5120 BLH is a 20 % talc-filled polypropylene homopolymer compound /PP-H TD20 (ISO 1043)/.

INNOPOL® CS 1-5120 BLH is recommended especially for producing products, where high stiffness and long term heat stability are required.
General  
Material Status 
  • Commercial: Active
Availability 
  • Europe
Filler / Reinforcement 
  • Talc Filler, 20% Filler by Weight
Additive 
  • Heat Stabilizer
Features 
  • Good Heat Aging Resistance
  • Heat Stabilized
  • High Stiffness
  • Homopolymer
  
Appearance 
  • Black
Forms 
  • Pellets
Processing Method 
  • Injection Molding
Resin ID (ISO 1043)
  • PP-H TD20
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ISO 1183
Melt Volume-Flow Rate (MVR) (230°C/5.0 kg)
in³/10min
 ISO 1133
Ash Content (1112°F)
%
 ISO 3451-1
Mechanical
Nominal Value
Unit
Test Method
Tensile Modulus
psi
 ISO 527-2/1
Tensile Stress (Yield)
psi
 ISO 527-2/50
Tensile Strain (Yield)
%
 ISO 527-2/50
Nominal Tensile Strain at Break
%
 ISO 527-2
Flexural Modulus 2
psi
 ISO 178
Impact
Nominal Value
Unit
Test Method
Charpy Notched Impact Strength
     ISO 179/1eA
-22°F
ft·lb/in²
  
73°F
ft·lb/in²
  
Charpy Unnotched Impact Strength
     ISO 179/1eU
-22°F
ft·lb/in²
  
73°F
ft·lb/in²
  
Thermal
Nominal Value
Unit
Test Method
Heat Deflection Temperature
      
66 psi, Unannealed
°F
 ISO 75-2/B
264 psi, Unannealed
°F
 ISO 75-2/A
Vicat Softening Temperature
      
--
°F
 ISO 306/A120
--
°F
 ISO 306/B120
Flammability
Nominal Value
Unit
Test Method
Flame Rating - UL (0.0630 in)
 
 FMVSS 302
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: INNOPOL® PP CS 1-5120 BLH, INNOPOL PP CS 15120 BLH, INNOPOL® PP , INNOPOL PP, INNOPOLPPCS15120BLH, INNOPOLPP, CS 1, PPCS 1-5120 BLH, PPCS 15120 BLH, PPCS 1:5120 BLH, PPCS 1/5120 BLH, PPCS 1+5120 BLH, PPCS 1_5120 BLH, PPCS 1 5120 BLH, PPCS1, PPCS 1, PPCS15120BLH, CS 1-5120 BLH, CS 15120 BLH, CS 1:5120 BLH, CS 1/5120 BLH, CS 1+5120 BLH, CS 1_5120 BLH, CS 1 5120 BLH, CS1, 15120, 5120BLH, PPCS1_5120BLH, CS15120BLH, CS1_5120BLH, Polypropylene Homopolymer, PP Homopolymer, Polypropylene, PP, Inno-Comp, PolypropyleneHomopolymer, PPHomopolymer, 1CS, 1PPCS
Features
Features may also be described by the following terms: Good Heat Aging Resistance, High Stiffness, Heat Stabilized, Heat-ageing Stabilized, Heat Ageing Stabilized, Heat-aging Stabilized, Heat Aging Stabilized.
Injection
Nominal Value
Unit
 
Drying Temperature
°F
  
Drying Time
hr
  
Suggested Max Moisture
%
  
Rear Temperature
°F
  
Middle Temperature
°F
  
Front Temperature
°F
  
Processing (Melt) Temp
°F
  
Mold Temperature
°F
  
Injection Rate
 
  
Injection Notes
Hold pressure: 50 to 100 % of actual injection pressure
Notes
1Typical properties: these are not to be construed as specifications.
20.079 in/min
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.