IDES Prospector Already have an account? Login Here

IDES

INNOPOL® PP CS 1-6140 N

Polypropylene Homopolymer

Talc Filler, 40%

Supplied by Inno-Comp Ltd.

The technical datasheet with complete property values for INNOPOL® PP CS 1-6140 N is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
INNOPOL® CS 1-6140 N is a 40 % talc-filled polypropylene homopolymer compound /PP-H TD40 (ISO 1043)/.

INNOPOL® CS 1-6140 N is developed for producing injection moulded components for household equipments. INNOPOL® CS 1-6140 N is high heat and wash-liquor stabilised.
General  
Material Status 
  • Commercial: Active
Availability 
  • Europe
Filler / Reinforcement 
  • Talc Filler, 40% Filler by Weight
Additive 
  • Heat Stabilizer
Features 
  • Heat Stabilized
  • Homopolymer
  
Appearance 
  • Natural Color
Forms 
  • Pellets
Processing Method 
  • Injection Molding
Resin ID (ISO 1043)
  • PP-H TD40
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ISO 1183
Melt Mass-Flow Rate (MFR) (230°C/2.16 kg)
g/10 min
 ISO 1133
Melt Volume-Flow Rate (MVR) (230°C/2.16 kg)
in³/10min
 ISO 1133
Ash Content (1112°F)
%
 ISO 3451-1
Mechanical
Nominal Value
Unit
Test Method
Tensile Modulus
psi
 ISO 527-2/1
Tensile Stress (Yield)
psi
 ISO 527-2/50
Tensile Strain (Yield)
%
 ISO 527-2/50
Flexural Modulus 2
psi
 ISO 178
Impact
Nominal Value
Unit
Test Method
Charpy Notched Impact Strength
     ISO 179/1eA
-4°F
ft·lb/in²
  
73°F
ft·lb/in²
  
Thermal
Nominal Value
Unit
Test Method
Heat Deflection Temperature
      
66 psi, Unannealed
°F
 ISO 75-2/B
264 psi, Unannealed
°F
 ISO 75-2/A
Vicat Softening Temperature
      
--
°F
 ISO 306/A120
--
°F
 ISO 306/B120
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: INNOPOL® PP CS 1-6140 N, INNOPOL PP CS 16140 N, INNOPOL® PP , INNOPOL PP, INNOPOLPPCS16140N, INNOPOLPP, CS 1, PPCS 1-6140 N, PPCS 16140 N, PPCS 1:6140 N, PPCS 1/6140 N, PPCS 1+6140 N, PPCS 1_6140 N, PPCS 1 6140 N, PPCS1, PPCS 1, PPCS16140N, CS 1-6140 N, CS 16140 N, CS 1:6140 N, CS 1/6140 N, CS 1+6140 N, CS 1_6140 N, CS 1 6140 N, CS1, 16140, 6140N, PPCS1_6140N, CS16140N, CS1_6140N, Polypropylene Homopolymer, PP Homopolymer, Polypropylene, PP, Inno-Comp, PolypropyleneHomopolymer, PPHomopolymer, 1CS, 1PPCS
Features
Features may also be described by the following terms: Heat Stabilized, Heat-ageing Stabilized, Heat Ageing Stabilized, Heat-aging Stabilized, Heat Aging Stabilized.
Injection
Nominal Value
Unit
 
Drying Temperature
°F
  
Drying Time
hr
  
Suggested Max Moisture
%
  
Rear Temperature
°F
  
Middle Temperature
°F
  
Front Temperature
°F
  
Processing (Melt) Temp
°F
  
Mold Temperature
°F
  
Injection Rate
 
  
Injection Notes
Hold pressure: 50 to 100 % of actual injection pressure
Notes
1Typical properties: these are not to be construed as specifications.
20.079 in/min
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.