IDES Prospector Already have an account? Login Here

IDES

INNOPOL® PP CS 1-8000

Polypropylene Homopolymer

Supplied by Inno-Comp Ltd.

The technical datasheet with complete property values for INNOPOL® PP CS 1-8000 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
INNOPOL® CS 1-8000 is a polypropylene homopolymer compound. This grade is available in nature and custom coloured form.

INNOPOL® CS 1-8000 is highly suitable for manufacturing indoor waste water discharge system and chemical treated parts, where the required properties are high strength, high stiffness and chemical resistance.
General  
Material Status 
  • Commercial: Active
Availability 
  • Europe
Features 
  • Good Chemical Resistance
  • High Stiffness
  • High Strength
  • Homopolymer
  
Uses 
  • Plumbing Parts
Appearance 
  • Colors Available
  • Natural Color
  
Forms 
  • Pellets
Processing Method 
  • Extrusion
  • Injection Molding
  
Resin ID (ISO 1043)
  • PP-H
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ISO 1183
Melt Mass-Flow Rate (MFR) (230°C/2.16 kg)
g/10 min
 ISO 1133
Mechanical
Nominal Value
Unit
Test Method
Tensile Modulus
psi
 ISO 527-2/1
Tensile Stress (Yield)
psi
 ISO 527-2/50
Tensile Strain (Yield)
%
 ISO 527-2/50
Impact
Nominal Value
Unit
Test Method
Charpy Notched Impact Strength
     ISO 179/1eA
-4°F
ft·lb/in²
  
73°F
ft·lb/in²
  
Charpy Unnotched Impact Strength
     ISO 179/1eU
-4°F
ft·lb/in²
  
73°F
ft·lb/in²
  
Thermal
Nominal Value
Unit
Test Method
Heat Deflection Temperature
      
66 psi, Unannealed
°F
 ISO 75-2/B
264 psi, Unannealed
°F
 ISO 75-2/A
Melting Temperature
°F
 ISO 11357-3
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: INNOPOL® PP CS 1-8000, INNOPOL PP CS 18000, INNOPOL® PP , INNOPOL PP, INNOPOLPPCS18000, INNOPOLPP, CS 1, PPCS 1-8000, PPCS 18000, PPCS 1:8000, PPCS 1/8000, PPCS 1+8000, PPCS 1_8000, PPCS 1 8000, PPCS1, PPCS 1, PPCS18000, CS 1-8000, CS 18000, CS 1:8000, CS 1/8000, CS 1+8000, CS 1_8000, CS 1 8000, CS1, 18000, PPCS1_8000, CS18000, CS1_8000, Polypropylene Homopolymer, PP Homopolymer, Polypropylene, PP, Inno-Comp, PolypropyleneHomopolymer, PPHomopolymer, 1CS, 1PPCS
Features
Features may also be described by the following terms: Good Chemical Resistance, Chemical Resistant, High Stiffness, High Strength.
Injection
Nominal Value
Unit
 
Drying Temperature
°F
  
Drying Time
hr
  
Suggested Max Moisture
%
  
Rear Temperature
°F
  
Middle Temperature
°F
  
Front Temperature
°F
  
Processing (Melt) Temp
°F
  
Mold Temperature
°F
  
Injection Rate
 
  
Injection Notes
Hold pressure: 50 to 100 % of actual injection pressure
Extrusion
Nominal Value
Unit
 
Drying Temperature
°F
  
Drying Time
hr
  
Suggested Max Moisture
%
  
Cylinder Zone 1 Temp.
°F
  
Cylinder Zone 2 Temp.
°F
  
Cylinder Zone 3 Temp.
°F
  
Cylinder Zone 4 Temp.
°F
  
Cylinder Zone 5 Temp.
°F
  
Melt Temperature
°F
  
Die Temperature
°F
  
Notes
1Typical properties: these are not to be construed as specifications.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.