IDES Prospector Already have an account? Login Here

IDES

INNOPOL® PP CS 2-8960

Polypropylene Copolymer

Barium Sulfate, 60%

Supplied by Inno-Comp Ltd.

The technical datasheet with complete property values for INNOPOL® PP CS 2-8960 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
INNOPOL® CS 2-8960 is a 60% Barium-sulfate filled compound based on polypropylene block-copolymer. This grade is available in nature and custom coloured form.

INNOPOL® CS 2-8960 is developed for extrusion of pipes, sheets and different profiles.
General  
Material Status 
  • Commercial: Active
Availability 
  • Europe
Filler / Reinforcement 
  • Barium Sulfate, 60% Filler by Weight
Features 
  • Block Copolymer
Uses 
  • Piping
  • Profiles
  • Sheet
Appearance 
  • Colors Available
  • Natural Color
 
Forms 
  • Pellets
Processing Method 
  • Extrusion
  • Pipe Extrusion
  • Profile Extrusion
  • Sheet Extrusion
 
Resin ID (ISO 1043)
  • PP/PE
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
ISO 1183
Melt Mass-Flow Rate (MFR) (230°C/2.16 kg)
g/10 min
ISO 1133
Melt Volume-Flow Rate (MVR) (230°C/2.16 kg)
in³/10min
ISO 1133
Mechanical
Nominal Value
Unit
Test Method
Tensile Modulus
psi
ISO 527-2/1
Tensile Stress (Yield)
psi
ISO 527-2/50
Tensile Strain (Break)
%
ISO 527-2/50
Flexural Modulus 2
psi
ISO 178
Impact
Nominal Value
Unit
Test Method
Charpy Notched Impact Strength
    ISO 179/1eA
-4°F
ft·lb/in²
 
73°F
ft·lb/in²
 
Thermal
Nominal Value
Unit
Test Method
Heat Deflection Temperature (66 psi, Unannealed)
°F
ISO 75-2/B
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: INNOPOL® PP CS 2-8960, INNOPOL PP CS 28960, INNOPOL® PP , INNOPOL PP, INNOPOLPPCS28960, INNOPOLPP, CS 2, PPCS 2-8960, PPCS 28960, PPCS 2:8960, PPCS 2/8960, PPCS 2+8960, PPCS 2_8960, PPCS 2 8960, PPCS2, PPCS 2, PPCS28960, CS 2-8960, CS 28960, CS 2:8960, CS 2/8960, CS 2+8960, CS 2_8960, CS 2 8960, CS2, 28960, PPCS2_8960, CS28960, CS2_8960, Polypropylene Copolymer, PP Copolymer, Polypropylene, PP, Inno-Comp, PolypropyleneCopolymer, PPCopolymer, 2CS, 2PPCS
Features
Features may also be described by the following terms: Block Copolymer.
Uses
Uses may also be described by the following terms: Piping, Pipe.
Extrusion
Nominal Value
Unit
 
Drying Temperature
°F
 
Drying Time
hr
 
Suggested Max Moisture
%
 
Cylinder Zone 1 Temp.
°F
 
Cylinder Zone 2 Temp.
°F
 
Cylinder Zone 3 Temp.
°F
 
Cylinder Zone 4 Temp.
°F
 
Cylinder Zone 5 Temp.
°F
 
Melt Temperature
°F
 
Die Temperature
°F
 
Notes
1Typical properties: these are not to be construed as specifications.
20.079 in/min
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.