IDES Prospector Already have an account? Login Here

IDES

INNOPOL® PP CS 2-9000 MA B

Polypropylene Copolymer

Supplied by Inno-Comp Ltd.

The technical datasheet with complete property values for INNOPOL® PP CS 2-9000 MA B is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
INNOPOL® CS 2-9000 MA B is a black coloured, high melt flow copolymer with antistatic additivation.

INNOPOL® CS 2-9000 MA B is developed for producing injection moulded automotive components
General  
Material Status 
  • Commercial: Active
Availability 
  • Europe
Additive 
  • Antistatic
Features 
  • Antistatic
  • Block Copolymer
  • High Flow
Uses 
  • Automotive Applications
Appearance 
  • Black
Forms 
  • Pellets
Processing Method 
  • Injection Molding
Resin ID (ISO 1043)
  • PP/PE
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
ISO 1183
Melt Mass-Flow Rate (MFR) (230°C/2.16 kg)
g/10 min
ISO 1133
Melt Volume-Flow Rate (MVR) (230°C/2.16 kg)
in³/10min
ISO 1133
Molding Shrinkage
    ISO 294-4
Across Flow
%
 
Flow
%
 
Mechanical
Nominal Value
Unit
Test Method
Tensile Modulus
psi
ISO 527-2/2
Tensile Stress (Yield)
psi
ISO 527-2/50
Tensile Strain (Yield)
%
ISO 527-2/50
Nominal Tensile Strain at Break
%
ISO 527-2
Flexural Modulus 2
psi
ISO 178
Impact
Nominal Value
Unit
Test Method
Charpy Notched Impact Strength
    ISO 179/1eA
-22°F
ft·lb/in²
 
73°F
ft·lb/in²
 
Charpy Unnotched Impact Strength
    ISO 179/1eU
-22°F, Partial Break
ft·lb/in²
 
73°F
 
 
Thermal
Nominal Value
Unit
Test Method
Heat Deflection Temperature
     
66 psi, Unannealed
°F
ISO 75-2/B
264 psi, Unannealed
°F
ISO 75-2/A
Vicat Softening Temperature
     
--
°F
ISO 306/A120
--
°F
ISO 306/B120
Melting Temperature
°F
ISO 11357-3
Flammability
Nominal Value
Unit
Test Method
Flame Rating - UL (0.0630 in)
 
FMVSS 302
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: INNOPOL® PP CS 2-9000 MA B, INNOPOL PP CS 29000 MA B, INNOPOL® PP , INNOPOL PP, INNOPOLPPCS29000MAB, INNOPOLPP, CS 2, PPCS 2-9000 MA B, PPCS 29000 MA B, PPCS 2:9000 MA B, PPCS 2/9000 MA B, PPCS 2+9000 MA B, PPCS 2_9000 MA B, PPCS 2 9000 MA B, PPCS2, PPCS 2, PPCS29000MAB, CS 2-9000 MA B, CS 29000 MA B, CS 2:9000 MA B, CS 2/9000 MA B, CS 2+9000 MA B, CS 2_9000 MA B, CS 2 9000 MA B, CS2, 29000, 9000MA, MAB, PPCS2_9000MAB, CS29000MAB, CS2_9000MAB, Polypropylene Copolymer, PP Copolymer, Polypropylene, PP, Inno-Comp, PolypropyleneCopolymer, PPCopolymer, 2CS, 2PPCS
Features
Features may also be described by the following terms: Block Copolymer, High Flow, High Melt, High MFI.
Uses
Uses may also be described by the following terms: Automotive Applications, Automotive Sector.
Injection
Nominal Value
Unit
 
Drying Temperature
°F
 
Drying Time
hr
 
Suggested Max Moisture
%
 
Rear Temperature
°F
 
Middle Temperature
°F
 
Front Temperature
°F
 
Processing (Melt) Temp
°F
 
Mold Temperature
°F
 
Injection Rate
 
 
Injection Notes
Hold pressure: 50 to 100 % of actual injection pressure
Notes
1Typical properties: these are not to be construed as specifications.
20.079 in/min
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.