IDES Prospector Already have an account? Login Here

IDES

INNOPOL® PP CS 3-9230 KAR YU

Polypropylene Alloy

Mineral Filler, 26%

Supplied by Inno-Comp Ltd.

The technical datasheet with complete property values for INNOPOL® PP CS 3-9230 KAR YU is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
INNOPOL® CS 3-9230 KAR YU is a yellow coloured, UV-stabilized, 26% mineral-filled compound based on a blend of polypropylene homopolymer and block-copolymer.

INNOPOL® CS 3-9230 KAR YU is developed for producing injection moulded components for household appliances.
General  
Material Status 
  • Commercial: Active
Availability 
  • Europe
Filler / Reinforcement 
  • Mineral Filler, 26% Filler by Weight
Additive 
  • UV Stabilizer
Features 
  • Block Copolymer
  • Good UV Resistance
  • Homopolymer
Uses 
  • Appliances
Appearance 
  • Yellow
Forms 
  • Pellets
Processing Method 
  • Injection Molding
Resin ID (ISO 1043)
  • PP/PE KD 26
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ISO 1183
Melt Mass-Flow Rate (MFR) (230°C/2.16 kg)
g/10 min
 ISO 1133
Mechanical
Nominal Value
Unit
Test Method
Tensile Modulus
psi
 ISO 527-2/1
Tensile Stress (Yield)
psi
 ISO 527-2/50
Tensile Strain (Yield)
%
 ISO 527-2/50
Flexural Modulus 2
psi
 ISO 178
Impact
Nominal Value
Unit
Test Method
Charpy Notched Impact Strength
     ISO 179/1eA
-4°F
ft·lb/in²
  
73°F
ft·lb/in²
  
Charpy Unnotched Impact Strength
     ISO 179/1eU
-4°F
ft·lb/in²
  
73°F
ft·lb/in²
  
Thermal
Nominal Value
Unit
Test Method
Heat Deflection Temperature (66 psi, Unannealed)
°F
 ISO 75-2/B
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: INNOPOL® PP CS 3-9230 KAR YU, INNOPOL PP CS 39230 KAR YU, INNOPOL® PP , INNOPOL PP, INNOPOLPPCS39230KARYU, INNOPOLPP, CS 3, PPCS 3-9230 KAR YU, PPCS 39230 KAR YU, PPCS 3:9230 KAR YU, PPCS 3/9230 KAR YU, PPCS 3+9230 KAR YU, PPCS 3_9230 KAR YU, PPCS 3 9230 KAR YU, PPCS3, PPCS 3, PPCS39230KARYU, CS 3-9230 KAR YU, CS 39230 KAR YU, CS 3:9230 KAR YU, CS 3/9230 KAR YU, CS 3+9230 KAR YU, CS 3_9230 KAR YU, CS 3 9230 KAR YU, CS3, 39230, 9230KAR, KARYU, PPCS3_9230KARYU, CS39230KARYU, CS3_9230KARYU, Polypropylene Alloy, PP Alloy, Polypropylene, PP, Inno-Comp, PolypropyleneAlloy, PPAlloy, 3CS, 3PPCS
Features
Features may also be described by the following terms: Block Copolymer, Good UV Resistance, UV Resistant, Ultraviolet Resistant, Ultraviolet Light Resistant.
Injection
Nominal Value
Unit
 
Drying Temperature
°F
  
Drying Time
hr
  
Suggested Max Moisture
%
  
Rear Temperature
°F
  
Middle Temperature
°F
  
Front Temperature
°F
  
Processing (Melt) Temp
°F
  
Mold Temperature
°F
  
Injection Rate
 
  
Injection Notes
Hold pressure: 30 to 100 % of actual injection pressure
Notes
1Typical properties: these are not to be construed as specifications.
20.079 in/min
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.