IDES Prospector Already have an account? Login Here

IDES

INNOPOL® PE CS 5-8250 W

High Density Polyethylene

Chalk Filler, 50%

Supplied by Inno-Comp Ltd.

The technical datasheet with complete property values for INNOPOL® PE CS 5-8250 W is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
INNOPOL® CS 5-8250 W is a 50% chalk-filled compound based on high density polyethylene.

INNOPOL® CS 5-8250 W is developed for packaging film production.
General  
Material Status 
  • Commercial: Active
Availability 
  • Europe
Filler / Reinforcement 
  • Chalk Filler, 50% Filler by Weight
Uses 
  • Film
Appearance 
  • White
Forms 
  • Pellets
Processing Method 
  • Film Extrusion
Resin ID (ISO 1043)
  • HD KD50
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
ISO 1183
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg)
g/10 min
ISO 1133
Films
Nominal Value
Unit
Test Method
Tensile Stress
    ISO 527-3
MD: Break
psi
 
TD: Break
psi
 
Tensile Elongation
    ISO 527-3
MD: Break
%
 
TD: Break
%
 
Dart Drop Impact
g
ISO 7765-1
Elmendorf Tear Strength
    ISO 6383-2
MD
lbf
 
TD
lbf
 
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: INNOPOL® PE CS 5-8250 W, INNOPOL PE CS 58250 W, INNOPOL® PE , INNOPOL PE, INNOPOLPECS58250W, INNOPOLPE, CS 5, PECS 5-8250 W, PECS 58250 W, PECS 5:8250 W, PECS 5/8250 W, PECS 5+8250 W, PECS 5_8250 W, PECS 5 8250 W, PECS5, PECS 5, PECS58250W, CS 5-8250 W, CS 58250 W, CS 5:8250 W, CS 5/8250 W, CS 5+8250 W, CS 5_8250 W, CS 5 8250 W, CS5, 58250, 8250W, PECS5_8250W, CS58250W, CS5_8250W, Polyethylene, High Density, Polyethylene High Density, HDPE, Polyethylene, PE, Inno-Comp, PolyethyleneHighDensity, 5CS, 5PECS
Extrusion
Nominal Value
Unit
 
Drying Temperature
°F
 
Drying Time
hr
 
Suggested Max Moisture
%
 
Cylinder Zone 1 Temp.
°F
 
Cylinder Zone 2 Temp.
°F
 
Cylinder Zone 3 Temp.
°F
 
Cylinder Zone 4 Temp.
°F
 
Cylinder Zone 5 Temp.
°F
 
Melt Temperature
°F
 
Die Temperature
°F
 
Notes
1Typical properties: these are not to be construed as specifications.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.