IDES Prospector Already have an account? Login Here

IDES

Terluran® 968 K

Acrylonitrile Butadiene Styrene

Supplied by Styrolution

The technical datasheet with complete property values for Terluran® 968 K is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
Terluran is the tradename for the Styrolution line of ABS polymers. Terluran 900 products are two phase blends which contain a continuous SAN matrix and finely dispersed butadiene rubber particles.

Terluran can be injection molded, extruded, and blow molded.
General  
Material Status 
  • Commercial: Active
Availability 
  • Europe
  • North America
  
Additive 
  • Rubber
Features 
  • Good Flow
  • Good Impact Resistance
  • High Heat Resistance
Agency Ratings 
RoHS Compliance 
Appearance 
  • Black
  • Colors Available
  • Natural Color
Forms 
  • Pellets
Processing Method 
  • Blow Molding
  • Extrusion
  • Injection Molding
Resin ID (ISO 1043)
  • ABS
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ISO 1183
Melt Volume-Flow Rate (MVR)
     ISO 1133
200°C/21.6 kg
in³/10min
  
220°C/10.0 kg
in³/10min
  
Molding Shrinkage
%
  
Water Absorption
      
73°F, 24 hr
%
 DIN 53495
Equilibrium, 73°F, 50% RH
%
  
Mechanical
Nominal Value
Unit
Test Method
Tensile Modulus
psi
 ISO 527-2
Tensile Stress (Yield)
psi
 ISO 527-2/50
Tensile Strain (Yield)
%
 ISO 527-2/50
Flexural Strength
psi
 ISO 178
Impact
Nominal Value
Unit
Test Method
Charpy Notched Impact Strength
     ISO 179/1eA
-22°F
ft·lb/in²
  
73°F
ft·lb/in²
  
Charpy Unnotched Impact Strength
     ISO 179/1eU
-22°F
ft·lb/in²
  
73°F
ft·lb/in²
  
Notched Izod Impact (73°F)
ft·lb/in
 ASTM D256A
Thermal
Nominal Value
Unit
Test Method
Max. Continuous Use Temperature
°F
  
Vicat Softening Temperature
°F
 ISO 306/B50
CLTE - Flow (73 to 176°F)
in/in/°F
 DIN 53752
Thermal Conductivity
Btu·in/hr/ft²/°F
 DIN 52612
Electrical
Nominal Value
Unit
Test Method
Surface Resistivity
ohms
 IEC 60093
Volume Resistivity
ohm·cm
 IEC 60093
Dielectric Constant (1 MHz)
 
 IEC 60250
Dissipation Factor (1 MHz)
 
 IEC 60250
Comparative Tracking Index
     IEC 60112
Solution A
V
  
Solution B
V
  
Electric Strength
V/mil
 IEC 60243-1
Flammability
Nominal Value
Unit
Test Method
Flame Rating - UL (0.0630 in)
 
 UL 94
Flammability
      
> 39.4 mil
 
 FMVSS 302
Method BH
mm/min
 IEC 707
Method FH
in/min
 IEC 707
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Terluran® 968 K, Terluran 968 K, Terluran® , Terluran, Terluran968K, 968 K, 968K, Acrylonitrile Butadiene Styrene, ABS, Styrolution, AcrylonitrileButadieneStyrene, K968
Features
Features may also be described by the following terms: Good Flow, High Heat Resistance, Good Impact Resistance.
Agency Ratings
This plastic material has 1 certifications from the following agencies (the number in parentheses shows the number of certifications for that agency): EC (1).
Injection
Nominal Value
Unit
 
Drying Temperature
°F
  
Drying Time
hr
  
Processing (Melt) Temp
°F
  
Mold Temperature
°F
  
Notes
1Typical properties: these are not to be construed as specifications.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.