IDES Prospector Already have an account? Login Here

IDES

VICTREX® PEEK 150GL15

Polyetheretherketone

Glass Fiber Reinforcement, 15%

Supplied by Victrex plc

The technical datasheet with complete property values for VICTREX® PEEK 150GL15 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
High performance thermoplastic material, 15% glass fibre reinforced PolyEtherEtherKetone (PEEK), semi crystalline, granules for injection moulding, very easy flow, FDA food contact compliant, colour natural/beige.

Complex geometries with thin cross sections or long flow lengths where good strength in a static system is required. Low coefficient of thermal expansion. Chemically resistant to aggressive environments, suitable for sterilization for medical and food contact applications.
General  
Material Status 
  • Commercial: Active
Availability 
  • Asia Pacific
  • Europe
  • North America
Filler / Reinforcement 
  • Glass Fiber Reinforcement, 15% Filler by Weight
Features 
  • Food Contact Acceptable
  • Good Chemical Resistance
  • Good Flow
  • Good Sterilizability
  • High Strength
  • Semi Crystalline
Uses 
  • Medical/Healthcare Applications
  • Non-specific Food Applications
  
Agency Ratings 
Appearance 
  • Beige
  • Natural Color
  
Forms 
  • Granules
Processing Method 
  • Injection Molding
Physical
Nominal Value
Unit
Test Method
Density 2
g/cm³
 ISO 1183
Molding Shrinkage 3
     ISO 294-4
Across Flow: 356°F
%
  
Flow: 356°F
%
  
Water Absorption
     ISO 62
73°F, 24 hr, 0.126 in
%
  
Equilibrium, 73°F, 0.126 in, 50% RH
%
  
Spiral Flow 3 (356°F, 39.4 mil)
in
 Internal Method
Mechanical
Nominal Value
Unit
Test Method
Tensile Modulus (73°F)
psi
 ISO 527-2
Tensile Stress (Break, 73°F)
psi
 ISO 527-2
Tensile Strain (Break, 73°F)
%
 ISO 527-2
Flexural Modulus (73°F)
psi
 ISO 178
Flexural Strength (73°F)
psi
 ISO 178
Impact
Nominal Value
Unit
Test Method
Notched Izod Impact Strength (73°F)
ft·lb/in²
 ISO 180/A
Unnotched Izod Impact Strength (73°F)
ft·lb/in²
 ISO 180
Hardness
Nominal Value
Unit
Test Method
Shore Hardness (Shore D, 73°F)
 
 ISO 868
Thermal
Nominal Value
Unit
Test Method
Heat Deflection Temperature (264 psi, Unannealed)
°F
 ISO 75-2/A
Glass Transition Temperature
°F
 ISO 11357-2
Melting Temperature
°F
 ISO 11357-3
CLTE
     ISO 11359-2
Flow: > 289°F
in/in/°F
  
Flow: < 289°F
in/in/°F
  
Transverse: < 289°F
in/in/°F
  
Transverse: > 289°F
in/in/°F
  
Specific Heat (73°F)
Btu/lb/°F
 DSC
Thermal Conductivity (73°F)
Btu·in/hr/ft²/°F
 Internal Method
Electrical
Nominal Value
Unit
Test Method
Volume Resistivity
ohm·cm
 IEC 60093
Flammability
Nominal Value
Unit
Test Method
Flame Rating - UL (0.0197 in)
 
 UL 94
Fill Analysis
Nominal Value
Unit
Test Method
Melt Viscosity (752°F)
Pa·s
 ISO 11443
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: VICTREX® PEEK 150GL15, VICTREX PEEK 150GL15, VICTREX® PEEK , VICTREX PEEK, VICTREXPEEK150GL15, VICTREXPEEK, PEEK 150 GL 15, PEEK150GL15, PEEK150, PEEK, 150 GL 15, 150GL15, 150GL, GL15, Polyetheretherketone, Polyaryletherketone, PAEK, Victrex, GL150, 150PEEK
Features
Features may also be described by the following terms: Good Starilizability, Sterilizable, Semi-Crystalline, High Strength, Good Chemical Resistance, Chemical Resistant, Good Flow.
Uses
Uses may also be described by the following terms: Medical Applications, Food Applications.
Agency Ratings
This plastic material has 1 certifications from the following agencies (the number in parentheses shows the number of certifications for that agency): FDA (1).
Injection
Nominal Value
Unit
 
Drying Temperature
°F
  
Drying Time
hr
  
Hopper Temperature
°F
  
Rear Temperature
°F
  
Middle Temperature
°F
  
Front Temperature
°F
  
Nozzle Temperature
°F
  
Mold Temperature
°F
  
Injection Notes
Runner: Die / nozzle >3mm, manifold >3.5mm
Gate: >2mm or 0.5 x part thickness
Notes
1Typical properties: these are not to be construed as specifications.
2Crystalline
3375°C nozzle
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.