IDES Prospector Already have an account? Login Here

IDES

TABOREN EH 51 C 50

High Density Polyethylene

Calcium Carbonate Filler, 50%

Supplied by SILON s.ro

The technical datasheet with complete property values for TABOREN EH 51 C 50 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
General  
Material Status 
  • Commercial: Active
Availability 
  • Asia Pacific
  • Europe
  
Filler / Reinforcement 
  • Calcium Carbonate Filler, 50% Filler by Weight
Uses 
  • Bags
Forms 
  • Pellets
Processing Method 
  • Film Extrusion
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ISO 1183
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg)
g/10 min
 ISO 1133
Mechanical
Nominal Value
Unit
Test Method
Tensile Stress (Yield)
psi
 ISO 527-2/1B/50
Tensile Strain (Yield)
%
 ISO 527-2/1B/50
Flexural Modulus
psi
 ISO 178
Impact
Nominal Value
Unit
Test Method
Charpy Notched Impact Strength
     ISO 179/1eA
-4°F
ft·lb/in²
  
32°F
ft·lb/in²
  
73°F
ft·lb/in²
  
Thermal
Nominal Value
Unit
Test Method
Vicat Softening Temperature
°F
 ISO 306/A
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: TABOREN EH 51 C 50, TABOREN , TABORENEH51C50, EH 51 C 50, EH51, 51C, C50, EH51C50, Polyethylene, High Density, Polyethylene High Density, HDPE, Polyethylene, PE, SILON, PolyethyleneHighDensity, 51EH
Notes
1Typical properties: these are not to be construed as specifications.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.