IDES Prospector Already have an account? Login Here

IDES

Dugdale PVC Rigid Extrusion White Compound

Rigid Polyvinyl Chloride

Supplied by Dugdale Plc

The technical datasheet with complete property values for Dugdale PVC Rigid Extrusion White Compound is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
A transparent, tin stabilised, medium/high impact bottle compound containing a UV absorber.

This compound is suitable for blow moulding containers for packaging a wide variety of materials, including foodstuffs. Generally bottles or jars of up to 1.5 litres in capacity may be produced using this compound. This compound may also be used to extrude profiles and tubes.

Normally transparent, either Water White or Blue Tint to suit the customer's requirement. The same compound is also available in opaque colours as required.

The free VCM content of this compound is less than 1ppm and all the ingredients used in its manufacture are certified by their suppliers as having EU 2002/72 approval for use in contact with foodstuffs.
General  
Material Status 
  • Commercial: Active
Availability 
  • Europe
Additive 
  • Calcium-Zinc Stabilizer
Features 
  • Good Processability
  • Good Surface Finish
  • High Rigidity
  • Low Temperature Impact Resistance
  
Uses 
  • Cable Jacketing
  • Decorative Parts
  • General Purpose
  • Profiles
  
RoHS Compliance 
Appearance 
  • Colors Available
  • White
  
Forms 
  • Pellets
Processing Method 
  • Extrusion
  • Profile Extrusion
  
Physical
Nominal Value
Unit
Test Method
Specific Gravity
 
 BS 2782 620A
Mechanical
Nominal Value
Unit
Test Method
Tensile Strength (Yield)
psi
 BS 2782 320A-F
Thermal
Nominal Value
Unit
Test Method
Vicat Softening Temperature
°F
 BS 2782 120B 2
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Dugdale PVC Rigid Extrusion White Compound, Dugdale PVC , DugdalePVCRigidExtrusionWhiteCompound, DugdalePVC, PVCRigid Extrusion White Compound, PVCRigidExtrusion, PVC, PVCRigidExtrusionWhiteCompound, Rigid Extrusion White Compound, RigidExtrusion, ExtrusionWhite, WhiteCompound, RigidExtrusionWhiteCompound, Polyvinyl Chloride, Rigid, Polyvinyl Chloride Rigid, PVC, Rigid, PVC Rigid, Polyvinyl Chloride, Dugdale, PolyvinylChlorideRigid, PVCRigid, PolyvinylChloride, ExtrusionRigid, ExtrusionPVCRigid
Features
Features may also be described by the following terms: High Rigidity, Good Surface Finish, Low Temperatuer Impact Resistance, Low Temp Impact Resistance, Good Processability, Easy Processing.
Notes
1Typical properties: these are not to be construed as specifications.
2Rate B (120°C/h), Loading 2 (50 N)
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.