IDES Prospector Already have an account? Login Here

IDES

DuraGrip® DGR 6165TR

Thermoplastic Elastomer

Supplied by Advanced Polymer Alloys

The technical datasheet with complete property values for DuraGrip® DGR 6165TR is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
DuraGrip® DGR6165TR is a translucent thermoplastic elastomer (TPE) formulated for excellent elastic properties and enhanced adhesion to engineered thermoplastics using insert molding, co-injection molding and co-extrusion processes. DGR6165TR bonds tenaciously to polycarbonate, polycarbonate alloys, ABS, ASA, acrylics, and cellulosic materials. It will also bond to various nylons and PET. DGR6165TR is hygroscopic and drying is recommended at 150F for 3 to 4 hours to ensure optimum aesthetics, properties and adhesion.
General  
Material Status 
  • Commercial: Active
Availability 
  • North America
Features 
  • Bondability
  • Good Adhesion
  • High Elongation
Uses 
  • Bonding
Appearance 
  • Translucent
Processing Method 
  • Coextrusion
  • Injection Molding
  
Physical
Nominal Value
Unit
Test Method
Specific Gravity
      
--
 
 ASTM D471
--
g/cm³
 ISO 2781
Melt Mass-Flow Rate (MFR) (190°C/8.7 kg)
g/10 min
 ASTM D1238
Elastomers
Nominal Value
Unit
Test Method
Tensile Stress
     ASTM D412, ISO 37
Across Flow: 100% Strain
psi
  
Flow: 100% Strain
psi
  
Across Flow: 300% Strain
psi
  
Flow: 300% Strain
psi
  
Tensile Strength
     ASTM D412, ISO 37
Across Flow: Break
psi
  
Flow: Break
psi
  
Tensile Elongation
     ASTM D412, ISO 37
Across Flow: Break
%
  
Flow: Break
%
  
Tear Strength 2
     ASTM D624
Across Flow
lbf/in
  
Flow
lbf/in
  
Hardness
Nominal Value
Unit
Test Method
Durometer Hardness (Shore A, 10 sec)
 
 ASTM D2240, ISO 48
Fill Analysis
Nominal Value
Unit
Test Method
Melt Viscosity (374°F, 294 sec^-1)
Pa·s
 ASTM D3835
Related Terminology
This supplier and product may also be known by these terms: APA, Advanced Polymer Alloys is a division of Ferro

Product names can be difficult to match. You may have searched any one of these terms to find this product: DuraGrip® DGR 6165TR, DuraGrip DGR 6165TR, DuraGrip® , DuraGrip, DuraGripDGR6165TR, DGR 6165 TR, DGR 6165TR, DGR6165, 6165TR, DGR6165TR, Thermoplastic Elastomer, TPE, APA, ThermoplasticElastomer, 6165DGR
Features
Features may also be described by the following terms: Good Adhesion, Bondability, Bondable, High Elongation.
Injection
Nominal Value
Unit
 
Drying Temperature
°F
  
Drying Time
hr
  
Processing (Melt) Temp
°F
  
Notes
1Typical properties: these are not to be construed as specifications.
2Die C
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.