IDES Prospector Already have an account? Login Here

IDES

ALCOM® ABS 530/22 UV GY1039-07MCS

Acrylonitrile Butadiene Styrene

Supplied by ALBIS PLASTIC GmbH

The technical datasheet with complete property values for ALCOM® ABS 530/22 UV GY1039-07MCS is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
General  
Material Status 
  • Commercial: Active
Availability 
  • Asia Pacific
  • Europe
  • North America
Additive 
  • UV Stabilizer
Features 
  • Good UV Resistance
Uses 
  • Handles
Processing Method 
  • Injection Molding
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ISO 1183
Melt Volume-Flow Rate (MVR) (220°C/10.0 kg)
in³/10min
 ISO 1133
Mechanical
Nominal Value
Unit
Test Method
Tensile Modulus
psi
 ISO 527-2
Tensile Stress (Yield)
psi
 ISO 527-2
Tensile Strain (Yield)
%
 ISO 527-2
Flexural Modulus
psi
 ISO 178
Flexural Strength
psi
 ISO 178
Impact
Nominal Value
Unit
Test Method
Charpy Notched Impact Strength (73°F)
ft·lb/in²
 ISO 179/1eA
Charpy Unnotched Impact Strength (73°F)
ft·lb/in²
 ISO 179/1eU
Thermal
Nominal Value
Unit
Test Method
Heat Deflection Temperature (264 psi, Unannealed)
°F
 ISO 75-2/A
Vicat Softening Temperature
°F
 ISO 306/B50
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: ALCOM® ABS 530/22 UV GY1039-07MCS, ALCOM ABS 53022 UV GY103907MCS, ALCOM® ABS , ALCOM ABS, ALCOMABS53022UVGY103907MCS, ALCOMABS, ABS 530 22 UV GY 1039 07 MCS, ABS 530, 530, ABS530/22 UV GY1039-07MCS, ABS53022 UV GY103907MCS, ABS530:22 UV GY1039-07MCS, ABS530+22 UV GY1039-07MCS, ABS530-22 UV GY1039-07MCS, ABS530_22 UV GY1039-07MCS, ABS530 22 UV GY1039-07MCS, ABS530/22 UV GY1039:07MCS, ABS530/22 UV GY1039/07MCS, ABS530/22 UV GY1039+07MCS, ABS530/22 UV GY1039_07MCS, ABS530/22 UV GY1039 07MCS, ABS530, 530 22 UV GY 1039 07 MCS, ABS53022UVGY103907MCS, ABS530_22 UV GY103907MCS, ABS530 22 UV GY103907MCS, ABS53022 UV GY1039_07MCS, ABS53022 UV GY1039 07MCS, 530/22 UV GY1039-07MCS, 53022 UV GY103907MCS, 530:22 UV GY1039-07MCS, 530+22 UV GY1039-07MCS, 530-22 UV GY1039-07MCS, 530_22 UV GY1039-07MCS, 530 22 UV GY1039-07MCS, 530/22 UV GY1039:07MCS, 530/22 UV GY1039/07MCS, 530/22 UV GY1039+07MCS, 530/22 UV GY1039_07MCS, 530/22 UV GY1039 07MCS, 53022, 22UV, UVGY, GY1039, 103907, 07MCS, ABS530_22UVGY103907MCS, ABS53022UVGY1039_07MCS, 53022UVGY103907MCS, 530_22 UV GY103907MCS, 530 22 UV GY103907MCS, 53022 UV GY1039_07MCS, 53022 UV GY1039 07MCS, 530_22UVGY103907MCS, 53022UVGY1039_07MCS, Acrylonitrile Butadiene Styrene, ABS, Albis Euro, AcrylonitrileButadieneStyrene, 22530, 530ABS
Features
Features may also be described by the following terms: Good UV Resistance, UV Resistant, Ultraviolet Resistant, Ultraviolet Light Resistant.
Injection
Nominal Value
Unit
 
Processing (Melt) Temp
°F
  
Mold Temperature
°F
  
Notes
1Typical properties: these are not to be construed as specifications.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.