IDES Prospector Already have an account? Login Here

IDES

ALCOM® ABS 530/3.1 CF

Acrylonitrile Butadiene Styrene

Carbon Fiber Reinforcement

Supplied by ALBIS PLASTIC GmbH

The technical datasheet with complete property values for ALCOM® ABS 530/3.1 CF is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
General  
Material Status 
  • Commercial: Active
Availability 
  • Asia Pacific
  • Europe
  • North America
Filler / Reinforcement 
  • Carbon Fiber Reinforcement
Features 
  • Electrically Conductive
  • High Rigidity
 
Uses 
  • Containers
Processing Method 
  • Injection Molding
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
ISO 1183
Melt Volume-Flow Rate (MVR) (220°C/10.0 kg)
in³/10min
ISO 1133
Mechanical
Nominal Value
Unit
Test Method
Tensile Modulus
psi
ISO 527-2
Tensile Stress (Break)
psi
ISO 527-2
Tensile Strain (Break)
%
ISO 527-2
Flexural Modulus
psi
ISO 178
Flexural Strength
psi
ISO 178
Impact
Nominal Value
Unit
Test Method
Charpy Notched Impact Strength (73°F)
ft·lb/in²
ISO 179/1eA
Charpy Unnotched Impact Strength (73°F)
ft·lb/in²
ISO 179/1eU
Thermal
Nominal Value
Unit
Test Method
Heat Deflection Temperature (264 psi, Unannealed)
°F
ISO 75-2/A
Vicat Softening Temperature
°F
ISO 306/B50
Electrical
Nominal Value
Unit
Test Method
Surface Resistivity
ohm
IEC 60093
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: ALCOM® ABS 530/3.1 CF, ALCOM ABS 53031 CF, ALCOM® ABS , ALCOM ABS, ALCOMABS53031CF, ALCOMABS, ABS 530 3 1 CF, ABS 530, 530, ABS530/3.1 CF, ABS53031 CF, ABS530:3.1 CF, ABS530+3.1 CF, ABS530-3.1 CF, ABS530_3.1 CF, ABS530 3.1 CF, ABS530, 530 3 1 CF, ABS53031CF, ABS530_31 CF, ABS530 31 CF, 530/3.1 CF, 53031 CF, 530:3.1 CF, 530+3.1 CF, 530-3.1 CF, 530_3.1 CF, 530 3.1 CF, 5303, 31, 1CF, ABS530_31CF, 53031CF, 530_31 CF, 530 31 CF, 530_31CF, Acrylonitrile Butadiene Styrene, ABS, Albis Euro, AcrylonitrileButadieneStyrene, 3530, 530ABS
Features
Features may also be described by the following terms: Electrically Conductive, Conducts Electricity, Conductive, High Rigidity.
Injection
Nominal Value
Unit
 
Processing (Melt) Temp
°F
 
Mold Temperature
°F
 
Notes
1Typical properties: these are not to be construed as specifications.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.