IDES Prospector Already have an account? Login Here

IDES

ALCOM® ASA 540/7 SV1104-03 MCO

Acrylonitrile Styrene Acrylate

Supplied by ALBIS PLASTIC GmbH

The technical datasheet with complete property values for ALCOM® ASA 540/7 SV1104-03 MCO is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
General  
Material Status 
  • Commercial: Active
Availability 
  • Asia Pacific
  • Europe
  • North America
Features 
  • Good Processability
Uses 
  • Housings
Processing Method 
  • Injection Molding
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ISO 1183
Melt Volume-Flow Rate (MVR) (220°C/10.0 kg)
in³/10min
 ISO 1133
Mechanical
Nominal Value
Unit
Test Method
Tensile Modulus
psi
 ISO 527-2
Flexural Modulus
psi
 ISO 178
Flexural Strength
psi
 ISO 178
Impact
Nominal Value
Unit
Test Method
Charpy Notched Impact Strength (73°F)
ft·lb/in²
 ISO 179/1eA
Charpy Unnotched Impact Strength (73°F)
ft·lb/in²
 ISO 179/1eU
Hardness
Nominal Value
Unit
Test Method
Ball Indentation Hardness (H 358/30)
psi
 ISO 2039-1
Thermal
Nominal Value
Unit
Test Method
Heat Deflection Temperature (264 psi, Unannealed)
°F
 ISO 75-2/A
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: ALCOM® ASA 540/7 SV1104-03 MCO, ALCOM ASA 5407 SV110403 MCO, ALCOM® ASA , ALCOM ASA, ALCOMASA5407SV110403MCO, ALCOMASA, ASA 540 7 SV 1104 03 MCO, ASA 540, 540, ASA540/7 SV1104-03 MCO, ASA5407 SV110403 MCO, ASA540:7 SV1104-03 MCO, ASA540+7 SV1104-03 MCO, ASA540-7 SV1104-03 MCO, ASA540_7 SV1104-03 MCO, ASA540 7 SV1104-03 MCO, ASA540/7 SV1104:03 MCO, ASA540/7 SV1104/03 MCO, ASA540/7 SV1104+03 MCO, ASA540/7 SV1104_03 MCO, ASA540/7 SV1104 03 MCO, ASA540, 540 7 SV 1104 03 MCO, ASA5407SV110403MCO, ASA540_7 SV110403 MCO, ASA540 7 SV110403 MCO, ASA5407 SV1104_03 MCO, ASA5407 SV1104 03 MCO, 540/7 SV1104-03 MCO, 5407 SV110403 MCO, 540:7 SV1104-03 MCO, 540+7 SV1104-03 MCO, 540-7 SV1104-03 MCO, 540_7 SV1104-03 MCO, 540 7 SV1104-03 MCO, 540/7 SV1104:03 MCO, 540/7 SV1104/03 MCO, 540/7 SV1104+03 MCO, 540/7 SV1104_03 MCO, 540/7 SV1104 03 MCO, 5407, 7SV, SV1104, 110403, 03MCO, ASA540_7SV110403MCO, ASA5407SV1104_03MCO, 5407SV110403MCO, 540_7 SV110403 MCO, 540 7 SV110403 MCO, 5407 SV1104_03 MCO, 5407 SV1104 03 MCO, 540_7SV110403MCO, 5407SV1104_03MCO, Acrylonitrile Styrene Acrylate, ASA, Albis Euro, AcrylonitrileStyreneAcrylate, 7540, 540ASA
Features
Features may also be described by the following terms: Good Processability, Easy Processing.
Uses
Uses may also be described by the following terms: Housings, Housing.
Injection
Nominal Value
Unit
 
Processing (Melt) Temp
°F
  
Mold Temperature
°F
  
Notes
1Typical properties: these are not to be construed as specifications.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.