IDES Prospector Already have an account? Login Here

IDES

ALCOM® ASA + PC 540/5 UV MCF

Acrylonitrile Styrene Acrylate + PC

Supplied by ALBIS PLASTIC GmbH

The technical datasheet with complete property values for ALCOM® ASA + PC 540/5 UV MCF is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
General  
Material Status 
  • Commercial: Active
Availability 
  • Asia Pacific
  • Europe
  • North America
Features 
  • Good Processability
Uses 
  • Automotive Interior Parts
  • Housings
 
Appearance 
  • Metallized - Colors
Processing Method 
  • Injection Molding
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
ISO 1183
Melt Volume-Flow Rate (MVR) (220°C/10.0 kg)
in³/10min
ISO 1133
Mechanical
Nominal Value
Unit
Test Method
Tensile Modulus
psi
ISO 527-2
Flexural Modulus
psi
ISO 178
Flexural Strength
psi
ISO 178
Impact
Nominal Value
Unit
Test Method
Charpy Notched Impact Strength (73°F)
ft·lb/in²
ISO 179/1eA
Charpy Unnotched Impact Strength (73°F)
ft·lb/in²
ISO 179/1eU
Hardness
Nominal Value
Unit
Test Method
Ball Indentation Hardness (H 358/30)
psi
ISO 2039-1
Thermal
Nominal Value
Unit
Test Method
Heat Deflection Temperature (264 psi, Unannealed)
°F
ISO 75-2/A
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: ALCOM® ASA + PC 540/5 UV MCF, ALCOM ASA PC 5405 UV MCF, ALCOM® ASA + PC , ALCOM ASA PC, ALCOM® ASA : PC, ALCOM® ASA / PC, ALCOM® ASA - PC, ALCOM® ASA _ PC, ALCOM® ASA PC, ALCOMASAPC5405UVMCF, ALCOMASAPC, ALCOM ASA _ PC, PC 540 5 UV MCF, PC 540, ALCOMASA_PC, 540, PC540/5 UV MCF, PC5405 UV MCF, PC540:5 UV MCF, PC540+5 UV MCF, PC540-5 UV MCF, PC540_5 UV MCF, PC540 5 UV MCF, PC540, PC5405UVMCF, 540/5 UV MCF, 5405 UV MCF, 540:5 UV MCF, 540+5 UV MCF, 540-5 UV MCF, 540_5 UV MCF, 540 5 UV MCF, 5405, 5UV, UVMCF, PC540_5UVMCF, 5405UVMCF, 540_5UVMCF, Acrylonitrile Styrene Acrylate + PC, Acrylonitrile Styrene Acrylate PC, Acrylonitrile Styrene Acrylate : PC, Acrylonitrile Styrene Acrylate / PC, Acrylonitrile Styrene Acrylate - PC, Acrylonitrile Styrene Acrylate _ PC, Acrylonitrile Styrene Acrylate PC, ASA+PC, ASAPC, ASA:PC, ASA/PC, ASA-PC, ASA_PC, ASA PC, Acrylonitrile Styrene Acrylate, ASA, Albis Euro, AcrylonitrileStyreneAcrylatePC, AcrylonitrileStyreneAcrylate, AcrylonitrileStyreneAcrylate_PC, 5540, 540PC
Features
Features may also be described by the following terms: Good Processability, Easy Processing.
Uses
Uses may also be described by the following terms: Housings, Housing.
Injection
Nominal Value
Unit
 
Processing (Melt) Temp
°F
 
Mold Temperature
°F
 
Notes
1Typical properties: these are not to be construed as specifications.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.