IDES Prospector Already have an account? Login Here

IDES

ALCOM® AWL 15/1 GY1084-05LB

Acrylonitrile Butadiene Styrene

Supplied by Albis Plastic GmbH

The technical datasheet with complete property values for ALCOM® AWL 15/1 GY1084-05LB is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
General  
Material Status 
  • Commercial: Active
Availability 
  • Asia Pacific
  • Europe
  • North America
Additive 
  • Unspecified Additive (150000 ppm)
Uses 
  • Automotive Instrument Panel
Automotive Specifications 
Processing Method 
  • Injection Molding
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ISO 1183
Melt Volume-Flow Rate (MVR) (220°C/10.0 kg)
in³/10min
 ISO 1133
Mechanical
Nominal Value
Unit
Test Method
Tensile Modulus
psi
 ISO 527-2
Tensile Stress
     ISO 527-2
Yield
psi
  
Break
psi
  
Tensile Strain
     ISO 527-2
Yield
%
  
Break
%
  
Flexural Modulus
psi
 ISO 178
Flexural Strength
psi
 ISO 178
Impact
Nominal Value
Unit
Test Method
Charpy Notched Impact Strength (73°F)
ft·lb/in²
 ISO 179/1eA
Charpy Unnotched Impact Strength (73°F)
 
 ISO 179/1eU
Hardness
Nominal Value
Unit
Test Method
Ball Indentation Hardness (H 358/30)
psi
 ISO 2039-1
Thermal
Nominal Value
Unit
Test Method
Heat Deflection Temperature (264 psi, Unannealed)
°F
 ISO 75-2/A
Vicat Softening Temperature
°F
 ISO 306/B50
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: ALCOM® AWL 15/1 GY1084-05LB, ALCOM AWL 151 GY108405LB, ALCOM® AWL , ALCOM AWL, ALCOMAWL151GY108405LB, ALCOMAWL, AWL 15 1 GY 1084 05 LB, AWL 15, 15, AWL15/1 GY1084-05LB, AWL151 GY108405LB, AWL15:1 GY1084-05LB, AWL15+1 GY1084-05LB, AWL15-1 GY1084-05LB, AWL15_1 GY1084-05LB, AWL15 1 GY1084-05LB, AWL15/1 GY1084:05LB, AWL15/1 GY1084/05LB, AWL15/1 GY1084+05LB, AWL15/1 GY1084_05LB, AWL15/1 GY1084 05LB, AWL15, 15 1 GY 1084 05 LB, AWL151GY108405LB, AWL15_1 GY108405LB, AWL15 1 GY108405LB, AWL151 GY1084_05LB, AWL151 GY1084 05LB, 15/1 GY1084-05LB, 151 GY108405LB, 15:1 GY1084-05LB, 15+1 GY1084-05LB, 15-1 GY1084-05LB, 15_1 GY1084-05LB, 15 1 GY1084-05LB, 15/1 GY1084:05LB, 15/1 GY1084/05LB, 15/1 GY1084+05LB, 15/1 GY1084_05LB, 15/1 GY1084 05LB, 151, 1GY, GY1084, 108405, 05LB, AWL15_1GY108405LB, AWL151GY1084_05LB, 151GY108405LB, 15_1 GY108405LB, 15 1 GY108405LB, 151 GY1084_05LB, 151 GY1084 05LB, 15_1GY108405LB, 151GY1084_05LB, Acrylonitrile Butadiene Styrene, ABS, Albis Euro, AcrylonitrileButadieneStyrene, 115, 15AWL
Uses
Uses may also be described by the following terms: Automotive Instrument Panel, Automotive Dash Board.
Automotive Specifications
This plastic material has approval for 1 automotive specifications from the following agencies (the number in parentheses shows the number of specifications for that agency): OPEL (1).
Injection
Nominal Value
Unit
 
Processing (Melt) Temp
°F
  
Mold Temperature
°F
  
Notes
1Typical properties: these are not to be construed as specifications.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.