IDES Prospector Already have an account? Login Here

IDES

ALCOM® PA6 900/1 GF10 MR30

Polyamide 6

Glass\Mineral

Supplied by Albis Plastic GmbH

The technical datasheet with complete property values for ALCOM® PA6 900/1 GF10 MR30 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
General  
Material Status 
  • Commercial: Active
Availability 
  • Asia Pacific
  • Europe
  • North America
Filler / Reinforcement 
  • Glass\Mineral
Additive 
  • Heat Stabilizer
Features 
  • Heat Stabilized
  • High Stiffness
  • Low Warpage
Uses 
  • Housings
  • Machine/Mechanical Parts
  
Processing Method 
  • Injection Molding
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ISO 1183
Mechanical
Nominal Value
Unit
Test Method
Tensile Modulus
psi
 ISO 527-2
Tensile Stress (Break)
psi
 ISO 527-2
Tensile Strain (Break)
%
 ISO 527-2
Flexural Modulus
psi
 ISO 178
Flexural Strength
psi
 ISO 178
Impact
Nominal Value
Unit
Test Method
Charpy Notched Impact Strength (73°F)
ft·lb/in²
 ISO 179/1eA
Charpy Unnotched Impact Strength (73°F)
ft·lb/in²
 ISO 179/1eU
Thermal
Nominal Value
Unit
Test Method
Heat Deflection Temperature (264 psi, Unannealed)
°F
 ISO 75-2/A
Vicat Softening Temperature
°F
 ISO 306/B50
Melting Temperature
°F
 DSC
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: ALCOM® PA6 900/1 GF10 MR30, ALCOM PA6 9001 GF10 MR30, ALCOM® PA6 , ALCOM PA6, ALCOMPA69001GF10MR30, ALCOMPA6, PA 6900 1 GF 10 MR 30, PA 6900, 900, PA6900/1 GF10 MR30, PA69001 GF10 MR30, PA6900:1 GF10 MR30, PA6900+1 GF10 MR30, PA6900-1 GF10 MR30, PA6900_1 GF10 MR30, PA6900 1 GF10 MR30, PA6900, 69001, 900 1 GF 10 MR 30, PA69001GF10MR30, 900/1 GF10 MR30, 9001 GF10 MR30, 900:1 GF10 MR30, 900+1 GF10 MR30, 900-1 GF10 MR30, 900_1 GF10 MR30, 900 1 GF10 MR30, 9001, 1GF, GF10, 10MR, MR30, PA6900_1GF10MR30, 9001GF10MR30, 900_1GF10MR30, Polyamide 6, Nylon 6, Polyamide, Nylon, pa6, Albis Euro, Polyamide6, Nylon6, 1900, 6900PA
Generic Name
Generic Name may also be described by the following terms: PA6.
Features
Features may also be described by the following terms: Heat Stabilized, Heat-ageing Stabilized, Heat Ageing Stabilized, Heat-aging Stabilized, Heat Aging Stabilized, High Stiffness, Low Warpage, Low Warp.
Uses
Uses may also be described by the following terms: Housings, Housing, Machine Parts, Mechanical Parts, Machine/Mechanical Parts.
Injection
Nominal Value
Unit
 
Processing (Melt) Temp
°F
  
Mold Temperature
°F
  
Notes
1Typical properties: these are not to be construed as specifications.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.