IDES Prospector Already have an account? Login Here

IDES

ALCOM® PA6 900/11 GF30 SV 12-778 MCF

Polyamide 6

Glass Fiber Reinforcement, 30%

Supplied by Albis Plastic GmbH

The technical datasheet with complete property values for ALCOM® PA6 900/11 GF30 SV 12-778 MCF is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
General  
Material Status 
  • Commercial: Active
Availability 
  • Asia Pacific
  • Europe
  • North America
Filler / Reinforcement 
  • Glass Fiber Reinforcement, 30% Filler by Weight
Additive 
  • Mold Release
Features 
  • Good Flow
  • Good Mold Release
  • High Heat Resistance
  • High Rigidity
 
Uses 
  • Housings
Processing Method 
  • Injection Molding
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
ISO 1183
Mechanical
Nominal Value
Unit
Test Method
Tensile Modulus
psi
ISO 527-2
Tensile Stress (Break)
psi
ISO 527-2
Tensile Strain (Break)
%
ISO 527-2
Flexural Modulus
psi
ISO 178
Flexural Strength
psi
ISO 178
Impact
Nominal Value
Unit
Test Method
Charpy Notched Impact Strength (73°F)
ft·lb/in²
ISO 179/1eA
Charpy Unnotched Impact Strength (73°F)
ft·lb/in²
ISO 179/1eU
Thermal
Nominal Value
Unit
Test Method
Heat Deflection Temperature (264 psi, Unannealed)
°F
ISO 75-2/A
Vicat Softening Temperature
°F
ISO 306/B50
Melting Temperature
°F
DSC
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: ALCOM® PA6 900/11 GF30 SV 12-778 MCF, ALCOM PA6 90011 GF30 SV 12778 MCF, ALCOM® PA6 , ALCOM PA6, ALCOMPA690011GF30SV12778MCF, ALCOMPA6, PA 6900 11 GF 30 SV 12 778 MCF, PA 6900, 900, PA6900/11 GF30 SV 12-778 MCF, PA690011 GF30 SV 12778 MCF, PA6900:11 GF30 SV 12-778 MCF, PA6900+11 GF30 SV 12-778 MCF, PA6900-11 GF30 SV 12-778 MCF, PA6900_11 GF30 SV 12-778 MCF, PA6900 11 GF30 SV 12-778 MCF, PA6900/11 GF30 SV 12:778 MCF, PA6900/11 GF30 SV 12/778 MCF, PA6900/11 GF30 SV 12+778 MCF, PA6900/11 GF30 SV 12_778 MCF, PA6900/11 GF30 SV 12 778 MCF, PA6900, 690011, 900 11 GF 30 SV 12 778 MCF, PA690011GF30SV12778MCF, PA6900_11 GF30 SV 12778 MCF, PA6900 11 GF30 SV 12778 MCF, PA690011 GF30 SV 12_778 MCF, PA690011 GF30 SV 12 778 MCF, 900/11 GF30 SV 12-778 MCF, 90011 GF30 SV 12778 MCF, 900:11 GF30 SV 12-778 MCF, 900+11 GF30 SV 12-778 MCF, 900-11 GF30 SV 12-778 MCF, 900_11 GF30 SV 12-778 MCF, 900 11 GF30 SV 12-778 MCF, 900/11 GF30 SV 12:778 MCF, 900/11 GF30 SV 12/778 MCF, 900/11 GF30 SV 12+778 MCF, 900/11 GF30 SV 12_778 MCF, 900/11 GF30 SV 12 778 MCF, 90011, 11GF, GF30, 30SV, SV12, 12778, 778MCF, PA6900_11GF30SV12778MCF, PA690011GF30SV12_778MCF, 90011GF30SV12778MCF, 900_11 GF30 SV 12778 MCF, 900 11 GF30 SV 12778 MCF, 90011 GF30 SV 12_778 MCF, 90011 GF30 SV 12 778 MCF, 900_11GF30SV12778MCF, 90011GF30SV12_778MCF, Polyamide 6, Nylon 6, Polyamide, Nylon, pa6, Albis Euro, Polyamide6, Nylon6, 11900, 6900PA
Generic Name
Generic Name may also be described by the following terms: PA6.
Features
Features may also be described by the following terms: High Rigidity, High Heat Resistance, Good Flow, Good Mold Release, Easy Release, Good Demolding.
Uses
Uses may also be described by the following terms: Housings, Housing.
Injection
Nominal Value
Unit
 
Drying Temperature
°F
 
Drying Time
hr
 
Processing (Melt) Temp
°F
 
Mold Temperature
°F
 
Notes
1Typical properties: these are not to be construed as specifications.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.