IDES Prospector Already have an account? Login Here

IDES

ALCOM® PC 740/4 UV WT1257-04LD

Polycarbonate

Supplied by Albis Plastic GmbH

The technical datasheet with complete property values for ALCOM® PC 740/4 UV WT1257-04LD is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
General  
Material Status 
  • Commercial: Active
Availability 
  • Asia Pacific
  • Europe
  • North America
Features 
  • Good Flow
Uses 
  • Electrical Parts
  • Flexible Grips
  • Lighting Diffusers
Processing Method 
  • Injection Molding
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ISO 1183
Melt Volume-Flow Rate (MVR) (300°C/1.2 kg)
in³/10min
 ISO 1133
Mechanical
Nominal Value
Unit
Test Method
Tensile Modulus
psi
 ISO 527-2
Tensile Stress (Yield)
psi
 ISO 527-2
Tensile Strain (Yield)
%
 ISO 527-2
Impact
Nominal Value
Unit
Test Method
Charpy Notched Impact Strength (73°F)
ft·lb/in²
 ISO 179/1eA
Charpy Unnotched Impact Strength (73°F)
 
 ISO 179/1eU
Thermal
Nominal Value
Unit
Test Method
Heat Deflection Temperature (264 psi, Unannealed)
°F
 ISO 75-2/A
Vicat Softening Temperature
°F
 ISO 306/B50
Flammability
Nominal Value
Unit
Test Method
Flame Rating - UL
     UL 94
0.0591 in
 
  
0.0295 in
 
  
Flame Spread
in/min
 FMVSS 302
Additional Information
Nominal Value
Unit
Test Method
Half Power Angle Gamma - Tau
%
  
Light Diffusion (39.4 mil)
%
 ISO 13468-1
Total Transmission - Tau (39.4 mil)
%
 ISO 13468-1
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: ALCOM® PC 740/4 UV WT1257-04LD, ALCOM PC 7404 UV WT125704LD, ALCOM® PC , ALCOM PC, ALCOMPC7404UVWT125704LD, ALCOMPC, PC 740 4 UV WT 1257 04 LD, PC 740, 740, PC740/4 UV WT1257-04LD, PC7404 UV WT125704LD, PC740:4 UV WT1257-04LD, PC740+4 UV WT1257-04LD, PC740-4 UV WT1257-04LD, PC740_4 UV WT1257-04LD, PC740 4 UV WT1257-04LD, PC740/4 UV WT1257:04LD, PC740/4 UV WT1257/04LD, PC740/4 UV WT1257+04LD, PC740/4 UV WT1257_04LD, PC740/4 UV WT1257 04LD, PC740, 740 4 UV WT 1257 04 LD, PC7404UVWT125704LD, PC740_4 UV WT125704LD, PC740 4 UV WT125704LD, PC7404 UV WT1257_04LD, PC7404 UV WT1257 04LD, 740/4 UV WT1257-04LD, 7404 UV WT125704LD, 740:4 UV WT1257-04LD, 740+4 UV WT1257-04LD, 740-4 UV WT1257-04LD, 740_4 UV WT1257-04LD, 740 4 UV WT1257-04LD, 740/4 UV WT1257:04LD, 740/4 UV WT1257/04LD, 740/4 UV WT1257+04LD, 740/4 UV WT1257_04LD, 740/4 UV WT1257 04LD, 7404, 4UV, UVWT, WT1257, 125704, 04LD, PC740_4UVWT125704LD, PC7404UVWT1257_04LD, 7404UVWT125704LD, 740_4 UV WT125704LD, 740 4 UV WT125704LD, 7404 UV WT1257_04LD, 7404 UV WT1257 04LD, 740_4UVWT125704LD, 7404UVWT1257_04LD, Polycarbonate, PC, Albis Euro, 4740, 740PC
Features
Features may also be described by the following terms: Good Flow.
Uses
Uses may also be described by the following terms: Lighting Diffusers, Lens, Flexible Grips.
Injection
Nominal Value
Unit
 
Processing (Melt) Temp
°F
  
Mold Temperature
°F
  
Notes
1Typical properties: these are not to be construed as specifications.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.