IDES Prospector Already have an account? Login Here

IDES

ALCOM® PC 740/9 PTFE10 bl 41-511

Polycarbonate

Supplied by Albis Plastic GmbH

The technical datasheet with complete property values for ALCOM® PC 740/9 PTFE10 bl 41-511 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
General  
Material Status 
  • Commercial: Active
Availability 
  • Asia Pacific
  • Europe
  • North America
Additive 
  • PTFE Lubricant
Features 
  • Lubricated
Uses 
  • Bearings
  • Bushings
  • Housings
Processing Method 
  • Injection Molding
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
ISO 1183
Melt Volume-Flow Rate (MVR) (300°C/1.2 kg)
in³/10min
ISO 1133
Mechanical
Nominal Value
Unit
Test Method
Tensile Modulus
psi
ISO 527-2
Tensile Stress (Break)
psi
ISO 527-2
Tensile Strain (Break)
%
ISO 527-2
Flexural Modulus
psi
ISO 178
Flexural Strength
psi
ISO 178
Impact
Nominal Value
Unit
Test Method
Charpy Notched Impact Strength (73°F)
ft·lb/in²
ISO 179/1eA
Charpy Unnotched Impact Strength (73°F)
 
ISO 179/1eU
Thermal
Nominal Value
Unit
Test Method
Heat Deflection Temperature (264 psi, Unannealed)
°F
ISO 75-2/A
Vicat Softening Temperature
°F
ISO 306/B50
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: ALCOM® PC 740/9 PTFE10 bl 41-511, ALCOM PC 7409 PTFE10 bl 41511, ALCOM® PC , ALCOM PC, ALCOMPC7409PTFE10bl41511, ALCOMPC, PC 740 9 PTFE 10 bl 41 511, PC 740, 740, PC740/9 PTFE10 bl 41-511, PC7409 PTFE10 bl 41511, PC740:9 PTFE10 bl 41-511, PC740+9 PTFE10 bl 41-511, PC740-9 PTFE10 bl 41-511, PC740_9 PTFE10 bl 41-511, PC740 9 PTFE10 bl 41-511, PC740/9 PTFE10 bl 41:511, PC740/9 PTFE10 bl 41/511, PC740/9 PTFE10 bl 41+511, PC740/9 PTFE10 bl 41_511, PC740/9 PTFE10 bl 41 511, PC740, 740 9 PTFE 10 bl 41 511, PC7409PTFE10bl41511, PC740_9 PTFE10 bl 41511, PC740 9 PTFE10 bl 41511, PC7409 PTFE10 bl 41_511, PC7409 PTFE10 bl 41 511, 740/9 PTFE10 bl 41-511, 7409 PTFE10 bl 41511, 740:9 PTFE10 bl 41-511, 740+9 PTFE10 bl 41-511, 740-9 PTFE10 bl 41-511, 740_9 PTFE10 bl 41-511, 740 9 PTFE10 bl 41-511, 740/9 PTFE10 bl 41:511, 740/9 PTFE10 bl 41/511, 740/9 PTFE10 bl 41+511, 740/9 PTFE10 bl 41_511, 740/9 PTFE10 bl 41 511, 7409, 9PTFE, PTFE10, 10bl, bl41, 41511, PC740_9PTFE10bl41511, PC7409PTFE10bl41_511, 7409PTFE10bl41511, 740_9 PTFE10 bl 41511, 740 9 PTFE10 bl 41511, 7409 PTFE10 bl 41_511, 7409 PTFE10 bl 41 511, 740_9PTFE10bl41511, 7409PTFE10bl41_511, Polycarbonate, PC, Albis Euro, 9740, 740PC
Uses
Uses may also be described by the following terms: Housings, Housing.
Injection
Nominal Value
Unit
 
Processing (Melt) Temp
°F
 
Mold Temperature
°F
 
Notes
1Typical properties: these are not to be construed as specifications.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.