IDES Prospector Already have an account? Login Here

IDES

ALCOM® PC AWL 750/1 PTFE5

Acrylonitrile Butadiene Styrene + PC

Supplied by Albis Plastic GmbH

The technical datasheet with complete property values for ALCOM® PC AWL 750/1 PTFE5 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
General  
Material Status 
  • Commercial: Active
Availability 
  • Asia Pacific
  • Europe
  • North America
Additive 
  • PTFE Lubricant
Features 
  • Lubricated
Uses 
  • Housings
Processing Method 
  • Injection Molding
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ISO 1183
Melt Volume-Flow Rate (MVR) (260°C/5.0 kg)
in³/10min
 ISO 1133
Mechanical
Nominal Value
Unit
Test Method
Tensile Modulus
psi
 ISO 527-2
Tensile Stress (Break)
psi
 ISO 527-2
Tensile Strain (Break)
%
 ISO 527-2
Flexural Modulus
psi
 ISO 178
Flexural Strength
psi
 ISO 178
Impact
Nominal Value
Unit
Test Method
Charpy Notched Impact Strength (73°F)
ft·lb/in²
 ISO 179/1eA
Charpy Unnotched Impact Strength (73°F)
 
 ISO 179/1eU
Hardness
Nominal Value
Unit
Test Method
Ball Indentation Hardness (H 358/30)
psi
 ISO 2039-1
Thermal
Nominal Value
Unit
Test Method
Heat Deflection Temperature (264 psi, Unannealed)
°F
 ISO 75-2/A
Vicat Softening Temperature
°F
 ISO 306/B50
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: ALCOM® PC AWL 750/1 PTFE5, ALCOM PC AWL 7501 PTFE5, ALCOM® PC AWL , ALCOM PC AWL, ALCOMPCAWL7501PTFE5, ALCOMPCAWL, AWL 750 1 PTFE 5, AWL 750, 750, AWL750/1 PTFE5, AWL7501 PTFE5, AWL750:1 PTFE5, AWL750+1 PTFE5, AWL750-1 PTFE5, AWL750_1 PTFE5, AWL750 1 PTFE5, AWL750, 750 1 PTFE 5, AWL7501PTFE5, 750/1 PTFE5, 7501 PTFE5, 750:1 PTFE5, 750+1 PTFE5, 750-1 PTFE5, 750_1 PTFE5, 750 1 PTFE5, 7501, 1PTFE, PTFE5, AWL750_1PTFE5, 7501PTFE5, 750_1PTFE5, Acrylonitrile Butadiene Styrene + PC, Acrylonitrile Butadiene Styrene PC, Acrylonitrile Butadiene Styrene : PC, Acrylonitrile Butadiene Styrene / PC, Acrylonitrile Butadiene Styrene - PC, Acrylonitrile Butadiene Styrene _ PC, Acrylonitrile Butadiene Styrene PC, ABS+PC, ABSPC, ABS:PC, ABS/PC, ABS-PC, ABS_PC, ABS PC, Acrylonitrile Butadiene Styrene, ABS, Albis Euro, AcrylonitrileButadieneStyrenePC, AcrylonitrileButadieneStyrene, AcrylonitrileButadieneStyrene_PC, 1750, 750AWL
Uses
Uses may also be described by the following terms: Housings, Housing.
Injection
Nominal Value
Unit
 
Drying Temperature
°F
  
Drying Time
hr
  
Processing (Melt) Temp
°F
  
Mold Temperature
°F
  
Notes
1Typical properties: these are not to be construed as specifications.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.