IDES Prospector Already have an account? Login Here

IDES

ALCOM® POM 770/2732 AR15

Acetal (POM) Copolymer

Aramid Fiber

Supplied by Albis Plastic GmbH

The technical datasheet with complete property values for ALCOM® POM 770/2732 AR15 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
General  
Material Status 
  • Commercial: Active
Availability 
  • Asia Pacific
  • Europe
  • North America
Filler / Reinforcement 
  • Aramid Fiber
Features 
  • Copolymer
Uses 
  • Bearings
  • Bushings
  
Processing Method 
  • Injection Molding
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ISO 1183
Melt Volume-Flow Rate (MVR) (190°C/2.16 kg)
in³/10min
 ISO 1133
Mechanical
Nominal Value
Unit
Test Method
Tensile Modulus
psi
 ISO 527-2
Tensile Stress (Break)
psi
 ISO 527-2
Tensile Strain (Break)
%
 ISO 527-2
Flexural Modulus
psi
 ISO 178
Flexural Strength
psi
 ISO 178
Impact
Nominal Value
Unit
Test Method
Charpy Notched Impact Strength (73°F)
ft·lb/in²
 ISO 179/1eA
Charpy Unnotched Impact Strength (73°F)
ft·lb/in²
 ISO 179/1eU
Hardness
Nominal Value
Unit
Test Method
Ball Indentation Hardness (H 358/30)
psi
 ISO 2039-1
Thermal
Nominal Value
Unit
Test Method
Heat Deflection Temperature (264 psi, Unannealed)
°F
 ISO 75-2/A
Vicat Softening Temperature
°F
 ISO 306/B50
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: ALCOM® POM 770/2732 AR15, ALCOM POM 7702732 AR15, ALCOM® POM , ALCOM POM, ALCOMPOM7702732AR15, ALCOMPOM, POM 770 2732 AR 15, POM 770, 770, POM770/2732 AR15, POM7702732 AR15, POM770:2732 AR15, POM770+2732 AR15, POM770-2732 AR15, POM770_2732 AR15, POM770 2732 AR15, POM770, 770 2732 AR 15, POM7702732AR15, 770/2732 AR15, 7702732 AR15, 770:2732 AR15, 770+2732 AR15, 770-2732 AR15, 770_2732 AR15, 770 2732 AR15, 7702732, 2732AR, AR15, POM770_2732AR15, 7702732AR15, Acetal Copolymer, Acetal Copolymer, 770_2732AR15, Acetal (POM) Copolymer, Acetal POM Copolymer, Acetal, pom, Albis Euro, AcetalPOMCopolymer, 2732770, 770POM
Injection
Nominal Value
Unit
 
Processing (Melt) Temp
°F
  
Mold Temperature
°F
  
Notes
1Typical properties: these are not to be construed as specifications.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.