IDES Prospector Already have an account? Login Here

IDES

ALCOM® PP 620/1 WT 1433-05 LB

Polypropylene

Mineral\Inorganic, 30%

Supplied by Albis Plastic GmbH

The technical datasheet with complete property values for ALCOM® PP 620/1 WT 1433-05 LB is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
General  
Material Status 
  • Commercial: Active
Availability 
  • Asia Pacific
  • Europe
  • North America
Filler / Reinforcement 
  • Mineral\Inorganic, 30% Filler by Weight
Uses 
  • Reflectors
Processing Method 
  • Injection Molding
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
ISO 1183
Melt Volume-Flow Rate (MVR) (230°C/2.16 kg)
in³/10min
ISO 1133
Mechanical
Nominal Value
Unit
Test Method
Tensile Modulus
psi
ISO 527-2
Tensile Stress (Break)
psi
ISO 527-2
Tensile Strain (Break)
%
ISO 527-2
Flexural Strength
psi
ISO 178
Impact
Nominal Value
Unit
Test Method
Charpy Notched Impact Strength (73°F)
ft·lb/in²
ISO 179/1eA
Charpy Unnotched Impact Strength (73°F)
ft·lb/in²
ISO 179/1eU
Thermal
Nominal Value
Unit
Test Method
Heat Deflection Temperature (264 psi, Unannealed)
°F
ISO 75-2/A
Vicat Softening Temperature
°F
ISO 306/B50
Additional Information
Nominal Value
Unit
Test Method
Tristimulus Value Y
    DIN 5033
Reflection
%
 
Transmission: 19.7 mil
%
 
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: ALCOM® PP 620/1 WT 1433-05 LB, ALCOM PP 6201 WT 143305 LB, ALCOM® PP , ALCOM PP, ALCOMPP6201WT143305LB, ALCOMPP, PP 620 1 WT 1433 05 LB, PP 620, 620, PP620/1 WT 1433-05 LB, PP6201 WT 143305 LB, PP620:1 WT 1433-05 LB, PP620+1 WT 1433-05 LB, PP620-1 WT 1433-05 LB, PP620_1 WT 1433-05 LB, PP620 1 WT 1433-05 LB, PP620/1 WT 1433:05 LB, PP620/1 WT 1433/05 LB, PP620/1 WT 1433+05 LB, PP620/1 WT 1433_05 LB, PP620/1 WT 1433 05 LB, PP620, 620 1 WT 1433 05 LB, PP6201WT143305LB, PP620_1 WT 143305 LB, PP620 1 WT 143305 LB, PP6201 WT 1433_05 LB, PP6201 WT 1433 05 LB, 620/1 WT 1433-05 LB, 6201 WT 143305 LB, 620:1 WT 1433-05 LB, 620+1 WT 1433-05 LB, 620-1 WT 1433-05 LB, 620_1 WT 1433-05 LB, 620 1 WT 1433-05 LB, 620/1 WT 1433:05 LB, 620/1 WT 1433/05 LB, 620/1 WT 1433+05 LB, 620/1 WT 1433_05 LB, 620/1 WT 1433 05 LB, 6201, 1WT, WT1433, 143305, 05LB, PP620_1WT143305LB, PP6201WT1433_05LB, 6201WT143305LB, 620_1 WT 143305 LB, 620 1 WT 143305 LB, 6201 WT 1433_05 LB, 6201 WT 1433 05 LB, 620_1WT143305LB, 6201WT1433_05LB, Polypropylene, Unspecified, Polypropylene Unspecified, PP, Unspecified, PP Unspecified, Polypropylene, PP, Albis Euro, PolypropyleneUnspecified, PPUnspecified, 1620, 620PP
Generic Name
Generic Name may also be described by the following terms: Polypropilene, Polypropelene.
Injection
Nominal Value
Unit
 
Processing (Melt) Temp
°F
 
Mold Temperature
°F
 
Notes
1Typical properties: these are not to be construed as specifications.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.