IDES Prospector Already have an account? Login Here

IDES

ALCOM® PWL 10/1 WT 41-913 LB

Polycarbonate

Supplied by Albis Plastic GmbH

The technical datasheet with complete property values for ALCOM® PWL 10/1 WT 41-913 LB is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
General  
Material Status 
  • Commercial: Active
Availability 
  • Asia Pacific
  • Europe
  • North America
Processing Method 
  • Injection Molding
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
ISO 1183
Melt Volume-Flow Rate (MVR) (300°C/1.2 kg)
in³/10min
ISO 1133
Mechanical
Nominal Value
Unit
Test Method
Tensile Modulus
psi
ISO 527-2
Tensile Stress (Break)
psi
ISO 527-2
Tensile Strain (Break)
%
ISO 527-2
Flexural Modulus
psi
ISO 178
Flexural Strength
psi
ISO 178
Impact
Nominal Value
Unit
Test Method
Charpy Notched Impact Strength (73°F)
ft·lb/in²
ISO 179/1eA
Charpy Unnotched Impact Strength (73°F)
 
ISO 179/1eU
Hardness
Nominal Value
Unit
Test Method
Ball Indentation Hardness (H 358/30)
psi
ISO 2039-1
Thermal
Nominal Value
Unit
Test Method
Vicat Softening Temperature
°F
ISO 306/B50
Flammability
Nominal Value
Unit
Test Method
Flame Rating - UL (0.0315 in)
 
UL 94
Additional Information
Nominal Value
Unit
Test Method
Tristimulus Value Y
    DIN 5033
Reflection
%
 
Transmission: 19.7 mil
%
 
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: ALCOM® PWL 10/1 WT 41-913 LB, ALCOM PWL 101 WT 41913 LB, ALCOM® PWL , ALCOM PWL, ALCOMPWL101WT41913LB, ALCOMPWL, PWL 10 1 WT 41 913 LB, PWL 10, 10, PWL10/1 WT 41-913 LB, PWL101 WT 41913 LB, PWL10:1 WT 41-913 LB, PWL10+1 WT 41-913 LB, PWL10-1 WT 41-913 LB, PWL10_1 WT 41-913 LB, PWL10 1 WT 41-913 LB, PWL10/1 WT 41:913 LB, PWL10/1 WT 41/913 LB, PWL10/1 WT 41+913 LB, PWL10/1 WT 41_913 LB, PWL10/1 WT 41 913 LB, PWL10, 10 1 WT 41 913 LB, PWL101WT41913LB, PWL10_1 WT 41913 LB, PWL10 1 WT 41913 LB, PWL101 WT 41_913 LB, PWL101 WT 41 913 LB, 10/1 WT 41-913 LB, 101 WT 41913 LB, 10:1 WT 41-913 LB, 10+1 WT 41-913 LB, 10-1 WT 41-913 LB, 10_1 WT 41-913 LB, 10 1 WT 41-913 LB, 10/1 WT 41:913 LB, 10/1 WT 41/913 LB, 10/1 WT 41+913 LB, 10/1 WT 41_913 LB, 10/1 WT 41 913 LB, 101, 1WT, WT41, 41913, 913LB, PWL10_1WT41913LB, PWL101WT41_913LB, 101WT41913LB, 10_1 WT 41913 LB, 10 1 WT 41913 LB, 101 WT 41_913 LB, 101 WT 41 913 LB, 10_1WT41913LB, 101WT41_913LB, Polycarbonate, PC, Albis Euro, 110, 10PWL
Injection
Nominal Value
Unit
 
Processing (Melt) Temp
°F
 
Mold Temperature
°F
 
Notes
1Typical properties: these are not to be construed as specifications.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.