IDES Prospector Already have an account? Login Here

IDES

TEDUR® L 9114-1

Polyphenylene Sulfide

Glass Fiber Reinforcement, 60%

Supplied by Albis Plastic GmbH

The technical datasheet with complete property values for TEDUR® L 9114-1 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
General  
Material Status 
  • Commercial: Active
Availability 
  • Asia Pacific
  • Europe
  • North America
Filler / Reinforcement 
  • Glass Fiber Reinforcement, 60% Filler by Weight
Features 
  • Crystalline
  • High Stiffness
  • High Strength
Forms 
  • Pellets
Processing Method 
  • Injection Molding
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
ISO 1183
Mechanical
Nominal Value
Unit
Test Method
Tensile Modulus
psi
ISO 527-2
Tensile Stress (Break)
psi
ISO 527-2
Tensile Strain (Break)
%
ISO 527-2
Flexural Modulus
psi
ISO 178
Flexural Strength
psi
ISO 178
Outer Fiber Strain
%
ISO 178
Impact
Nominal Value
Unit
Test Method
Charpy Notched Impact Strength (73°F)
ft·lb/in²
ISO 179/1eA
Charpy Unnotched Impact Strength (73°F)
ft·lb/in²
ISO 179/1eU
Notched Izod Impact Strength (73°F)
ft·lb/in²
ISO 180/2A
Unnotched Izod Impact Strength (73°F)
ft·lb/in²
ISO 180/1U
Thermal
Nominal Value
Unit
Test Method
Heat Deflection Temperature (264 psi, Unannealed)
°F
ISO 75-2/A
Flammability
Nominal Value
Unit
Test Method
Glow Wire Flammability Index (0.0787 in)
°F
IEC 60695-2-12
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: TEDUR® L 9114-1, TEDUR L 91141, TEDUR® , TEDUR, TEDURL91141, L 9114, L 9114-1, L 91141, L 9114:1, L 9114/1, L 9114+1, L 9114_1, L 9114 1, L9114, 91141, L91141, L9114_1, Polyphenylene Sulfide, PPS, Albis Euro, PolyphenyleneSulfide, 9114L
Features
Features may also be described by the following terms: High Strength, High Stiffness.
Injection
Nominal Value
Unit
 
Processing (Melt) Temp
°F
 
Mold Temperature
°F
 
Notes
1Typical properties: these are not to be construed as specifications.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.