IDES Prospector Already have an account? Login Here

IDES

ALTECH® ABS A 1000/139 AS

Acrylonitrile Butadiene Styrene

Supplied by Albis Plastic GmbH

The technical datasheet with complete property values for ALTECH® ABS A 1000/139 AS is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
General  
Material Status 
  • Commercial: Active
Availability 
  • Asia Pacific
  • Europe
  • North America
Additive 
  • Antistatic
Features 
  • Antistatic
  • Copolymer
  • Good Flow
Uses 
  • Appliances
  • Business Equipment
  
Processing Method 
  • Injection Molding
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ISO 1183
Melt Volume-Flow Rate (MVR) (220°C/10.0 kg)
in³/10min
 ISO 1133
Water Absorption (Saturation, 73°F)
%
 ISO 62
Mechanical
Nominal Value
Unit
Test Method
Tensile Modulus
psi
 ISO 527-2
Tensile Stress (Break)
psi
 ISO 527-2
Tensile Strain (Break)
%
 ISO 527-2
Flexural Modulus
psi
 ISO 178
Flexural Strength
psi
 ISO 178
Impact
Nominal Value
Unit
Test Method
Charpy Notched Impact Strength (73°F)
ft·lb/in²
 ISO 179/1eA
Charpy Unnotched Impact Strength (73°F)
 
 ISO 179/1eU
Hardness
Nominal Value
Unit
Test Method
Ball Indentation Hardness (H 358/10)
psi
 ISO 2039-1
Thermal
Nominal Value
Unit
Test Method
Heat Deflection Temperature (264 psi, Unannealed)
°F
 ISO 75-2/A
Vicat Softening Temperature
°F
 ISO 306/B
Electrical
Nominal Value
Unit
Test Method
Surface Resistivity
ohms
 IEC 60093
Volume Resistivity
ohm·cm
 IEC 60093
Comparative Tracking Index (Solution A)
V
 IEC 60112
Flammability
Nominal Value
Unit
Test Method
Flame Rating - UL (0.0591 in)
 
 UL 94
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: ALTECH® ABS A 1000/139 AS, ALTECH ABS A 1000139 AS, ALTECH® ABS , ALTECH ABS, ALTECHABSA1000139AS, ALTECHABS, A 1000, ABSA 1000/139 AS, ABSA 1000139 AS, ABSA 1000:139 AS, ABSA 1000+139 AS, ABSA 1000-139 AS, ABSA 1000_139 AS, ABSA 1000 139 AS, ABSA1000, ABSA 1000, ABSA1000139AS, A 1000/139 AS, A 1000139 AS, A 1000:139 AS, A 1000+139 AS, A 1000-139 AS, A 1000_139 AS, A 1000 139 AS, A1000, 1000139, 139AS, ABSA1000_139AS, A1000139AS, A1000_139AS, Acrylonitrile Butadiene Styrene, ABS, Albis Euro, AcrylonitrileButadieneStyrene, 1000A, 1000ABSA
Features
Features may also be described by the following terms: Good Flow.
Uses
Uses may also be described by the following terms: Business Equipment, Business Machines.
Injection
Nominal Value
Unit
 
Processing (Melt) Temp
°F
  
Mold Temperature
°F
  
Notes
1Typical properties: these are not to be construed as specifications.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.