IDES Prospector Already have an account? Login Here

IDES

ALTECH® ABS A 2020/100 GF20

Acrylonitrile Butadiene Styrene

Glass Fiber Reinforcement, 20%

Supplied by Albis Plastic GmbH

The technical datasheet with complete property values for ALTECH® ABS A 2020/100 GF20 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
General  
Material Status 
  • Commercial: Active
Availability 
  • Asia Pacific
  • Europe
  • North America
Filler / Reinforcement 
  • Glass Fiber Reinforcement, 20% Filler by Weight
Features 
  • Copolymer
  • Good Flow
  • High Stiffness
Uses 
  • Engineering Parts
Processing Method 
  • Injection Molding
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ISO 1183
Melt Volume-Flow Rate (MVR) (220°C/10.0 kg)
in³/10min
 ISO 1133
Mechanical
Nominal Value
Unit
Test Method
Tensile Modulus
psi
 ISO 527-2
Tensile Stress (Break)
psi
 ISO 527-2
Tensile Strain (Break)
%
 ISO 527-2
Flexural Modulus
psi
 ISO 178
Flexural Strength
psi
 ISO 178
Impact
Nominal Value
Unit
Test Method
Charpy Notched Impact Strength (73°F)
ft·lb/in²
 ISO 179/1eA
Charpy Unnotched Impact Strength (73°F)
ft·lb/in²
 ISO 179/1eU
Hardness
Nominal Value
Unit
Test Method
Ball Indentation Hardness (H 358/10)
psi
 ISO 2039-1
Thermal
Nominal Value
Unit
Test Method
Heat Deflection Temperature (264 psi, Unannealed)
°F
 ISO 75-2/A
Vicat Softening Temperature
°F
 ISO 306/B
Electrical
Nominal Value
Unit
Test Method
Comparative Tracking Index (Solution A)
V
 IEC 60112
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: ALTECH® ABS A 2020/100 GF20, ALTECH ABS A 2020100 GF20, ALTECH® ABS , ALTECH ABS, ALTECHABSA2020100GF20, ALTECHABS, ABSA 2020 100 GF 20, A 2020, ABSA 2020/100 GF20, ABSA 2020100 GF20, ABSA 2020:100 GF20, ABSA 2020+100 GF20, ABSA 2020-100 GF20, ABSA 2020_100 GF20, ABSA 2020 100 GF20, ABSA2020, ABSA 2020, A 2020 100 GF 20, ABSA2020100GF20, A 2020/100 GF20, A 2020100 GF20, A 2020:100 GF20, A 2020+100 GF20, A 2020-100 GF20, A 2020_100 GF20, A 2020 100 GF20, A2020, 2020100, 100GF, GF20, ABSA2020_100GF20, A2020100GF20, A2020_100GF20, Acrylonitrile Butadiene Styrene, ABS, Albis Euro, AcrylonitrileButadieneStyrene, 2020A, 2020ABSA
Features
Features may also be described by the following terms: Good Flow, High Stiffness.
Uses
Uses may also be described by the following terms: Engineering Parts.
Injection
Nominal Value
Unit
 
Processing (Melt) Temp
°F
  
Mold Temperature
°F
  
Notes
1Typical properties: these are not to be construed as specifications.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.