IDES Prospector Already have an account? Login Here

IDES

ALTECH® POM A 2010/500 GF10

Acetal (POM) Copolymer

Glass Fiber Reinforcement

Supplied by Albis Plastic GmbH

The technical datasheet with complete property values for ALTECH® POM A 2010/500 GF10 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
General  
Material Status 
  • Commercial: Active
Availability 
  • Asia Pacific
  • Europe
  • North America
Filler / Reinforcement 
  • Glass Fiber Reinforcement
Features 
  • Copolymer
  • Good Strength
  • High Stiffness
Uses 
  • Machine/Mechanical Parts
Processing Method 
  • Injection Molding
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ISO 1183
Mechanical
Nominal Value
Unit
Test Method
Tensile Modulus
psi
 ISO 527-2
Tensile Stress (Break)
psi
 ISO 527-2
Tensile Strain (Break)
%
 ISO 527-2
Flexural Modulus
psi
 ISO 178
Flexural Strength
psi
 ISO 178
Impact
Nominal Value
Unit
Test Method
Charpy Notched Impact Strength (73°F)
ft·lb/in²
 ISO 179/1eA
Charpy Unnotched Impact Strength (73°F)
ft·lb/in²
 ISO 179/1eU
Thermal
Nominal Value
Unit
Test Method
Heat Deflection Temperature (264 psi, Unannealed)
°F
 ISO 75-2/A
Vicat Softening Temperature
°F
 ISO 306/B
Melting Temperature
°F
 ISO 11357-3
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: ALTECH® POM A 2010/500 GF10, ALTECH POM A 2010500 GF10, ALTECH® POM , ALTECH POM, ALTECHPOMA2010500GF10, ALTECHPOM, POMA 2010 500 GF 10, A 2010, POMA 2010/500 GF10, POMA 2010500 GF10, POMA 2010:500 GF10, POMA 2010+500 GF10, POMA 2010-500 GF10, POMA 2010_500 GF10, POMA 2010 500 GF10, POMA2010, POMA 2010, A 2010 500 GF 10, POMA2010500GF10, A 2010/500 GF10, A 2010500 GF10, A 2010:500 GF10, A 2010+500 GF10, A 2010-500 GF10, A 2010_500 GF10, A 2010 500 GF10, A2010, 2010500, 500GF, GF10, POMA2010_500GF10, A2010500GF10, Acetal Copolymer, Acetal Copolymer, A2010_500GF10, Acetal (POM) Copolymer, Acetal POM Copolymer, Acetal, pom, Albis Euro, AcetalPOMCopolymer, 2010A, 2010POMA
Features
Features may also be described by the following terms: High Stiffness, Good Strength.
Uses
Uses may also be described by the following terms: Machine Parts, Mechanical Parts, Machine/Mechanical Parts.
Injection
Nominal Value
Unit
 
Processing (Melt) Temp
°F
  
Mold Temperature
°F
  
Notes
1Typical properties: these are not to be construed as specifications.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.