IDES Prospector Already have an account? Login Here

IDES

ALTECH® PP-H A 1000/576

Polypropylene

Supplied by Albis Plastic GmbH

The technical datasheet with complete property values for ALTECH® PP-H A 1000/576 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
General  
Material Status 
  • Commercial: Active
Availability 
  • Asia Pacific
  • Europe
  • North America
Processing Method 
  • Injection Molding
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
ISO 1183
Melt Volume-Flow Rate (MVR) (230°C/2.16 kg)
in³/10min
ISO 1133
Mechanical
Nominal Value
Unit
Test Method
Tensile Modulus
psi
ISO 527-2
Tensile Stress (Yield)
psi
ISO 527-2
Tensile Strain (Yield)
%
ISO 527-2
Flexural Modulus
psi
ISO 178
Flexural Strength
psi
ISO 178
Impact
Nominal Value
Unit
Test Method
Charpy Notched Impact Strength (73°F)
ft·lb/in²
ISO 179/1eA
Charpy Unnotched Impact Strength (73°F)
 
ISO 179/1eU
Hardness
Nominal Value
Unit
Test Method
Ball Indentation Hardness (H 358/30)
psi
ISO 2039-1
Thermal
Nominal Value
Unit
Test Method
Heat Deflection Temperature (264 psi, Unannealed)
°F
ISO 75-2/A
Vicat Softening Temperature
°F
ISO 306/B
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: ALTECH® PP-H A 1000/576, ALTECH PPH A 1000576, ALTECH® PP-H , ALTECH PPH, ALTECH® PP:H, ALTECH® PP/H, ALTECH® PP+H, ALTECH® PP_H, ALTECH® PP H, ALTECHPPHA1000576, ALTECHPPH, ALTECH PP_H, ALTECH PP H, PP HA 1000 576, ALTECHPP_H, A 1000, PP-HA 1000/576, PPHA 1000576, PP-HA 1000:576, PP-HA 1000+576, PP-HA 1000-576, PP-HA 1000_576, PP-HA 1000 576, PP:HA 1000/576, PP/HA 1000/576, PP+HA 1000/576, PP_HA 1000/576, PP HA 1000/576, PPHA, HA1000, PP-HA 1000, PPHA 1000, PP:HA 1000, PP/HA 1000, PP+HA 1000, PP_HA 1000, PP HA 1000, PPHA1000576, PPHA 1000_576, PPHA 1000 576, PP_HA 1000576, PP HA 1000576, PPHA1000, A 1000/576, A 1000576, A 1000:576, A 1000+576, A 1000-576, A 1000_576, A 1000 576, A1000, 1000576, PPHA1000_576, PP_HA1000576, PP_HA1000, A1000576, A1000_576, Polypropylene, Unspecified, Polypropylene Unspecified, PP, Unspecified, PP Unspecified, Polypropylene, PP, Albis Euro, PolypropyleneUnspecified, PPUnspecified, 1000A, HAPP
Generic Name
Generic Name may also be described by the following terms: Polypropilene, Polypropelene.
Injection
Nominal Value
Unit
 
Processing (Melt) Temp
°F
 
Mold Temperature
°F
 
Notes
1Typical properties: these are not to be construed as specifications.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.