ALTECH PP-H A 2020/100 GF20 Albis Euro Polypropylene, Unspecified (Glass Fiber Reinforcement, 20%)

General

Material Status

Commercial: Active

Availability

Asia Pacific

Europe

North America

Filler / Reinforcement

Glass Fiber Reinforcement, 20% Filler by Weight

Features

Medium Hardness

Medium Rigidity

Uses

Furniture

Processing Method

Injection Molding

Physical	Nominal Value	Unit	Test Method
Density		g/cm³	ISO 1183
Melt Mass-Flow Rate (MFR) (230°C/2.16 kg)		g/10 min	ISO 1133
Mechanical	Nominal Value	Unit	Test Method
Tensile Modulus		psi	ISO 527-2
Tensile Stress (Break)		psi	ISO 527-2
Tensile Strain (Break)		%	ISO 527-2
Flexural Strength		psi	ISO 178
Impact	Nominal Value	Unit	Test Method
Charpy Notched Impact Strength (73°F)		ft·lb/in²	ISO 179/1eA
Charpy Unnotched Impact Strength (73°F)		ft·lb/in²	ISO 179/1eU
Thermal	Nominal Value	Unit	Test Method
Heat Deflection Temperature (264 psi, Unannealed)		°F	ISO 75-2/A
Vicat Softening Temperature		°F	ISO 306/B
Melting Temperature		°F	ISO 11357-3
Electrical	Nominal Value	Unit	Test Method
Surface Resistivity		ohms	IEC 60093
Volume Resistivity		ohm·cm	IEC 60093
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: ALTECH® PP-H A 2020/100 GF20, ALTECH PPH A 2020100 GF20, ALTECH® PP-H , ALTECH PPH, ALTECH® PP:H, ALTECH® PP/H, ALTECH® PP+H, ALTECH® PP_H, ALTECH® PP H, ALTECHPPHA2020100GF20, ALTECHPPH, ALTECH PP_H, ALTECH PP H, PP HA 2020 100 GF 20, ALTECHPP_H, A 2020, PP-HA 2020/100 GF20, PPHA 2020100 GF20, PP-HA 2020:100 GF20, PP-HA 2020+100 GF20, PP-HA 2020-100 GF20, PP-HA 2020_100 GF20, PP-HA 2020 100 GF20, PP:HA 2020/100 GF20, PP/HA 2020/100 GF20, PP+HA 2020/100 GF20, PP_HA 2020/100 GF20, PP HA 2020/100 GF20, PPHA, HA2020, PP-HA 2020, PPHA 2020, PP:HA 2020, PP/HA 2020, PP+HA 2020, PP_HA 2020, PP HA 2020, A 2020 100 GF 20, PPHA2020100GF20, PPHA 2020_100 GF20, PPHA 2020 100 GF20, PP_HA 2020100 GF20, PP HA 2020100 GF20, PPHA2020, A 2020/100 GF20, A 2020100 GF20, A 2020:100 GF20, A 2020+100 GF20, A 2020-100 GF20, A 2020_100 GF20, A 2020 100 GF20, A2020, 2020100, 100GF, GF20, PPHA2020_100GF20, PP_HA2020100GF20, PP_HA2020, A2020100GF20, A2020_100GF20, Polypropylene, Unspecified, Polypropylene Unspecified, PP, Unspecified, PP Unspecified, Polypropylene, PP, Albis Euro, PolypropyleneUnspecified, PPUnspecified, 2020A, HAPP
Generic Name
Generic Name may also be described by the following terms: Polypropilene, Polypropelene.
Features
Features may also be described by the following terms: Medium Rigidity, Good Rigidity, Medium Hardness.

Injection	Nominal Value	Unit
Processing (Melt) Temp		°F
Mold Temperature		°F

Notes

¹Typical properties: these are not to be construed as specifications.

ALTECH® PP-H A 2020/100 GF20

Polypropylene

Glass Fiber Reinforcement, 20%

Supplied by Albis Plastic GmbH