ALTECH PP-H A 2020/159 GF20 CP Albis Euro Polypropylene, Unspecified (Glass Fiber Reinforcement, 20%)

General

Material Status

Commercial: Active

Availability

Asia Pacific

Europe

North America

Filler / Reinforcement

Glass Fiber Reinforcement, 20% Filler by Weight

Features

Chemically Coupled

Good Toughness

High Rigidity

Uses

Automotive Under the Hood

Housings

Processing Method

Injection Molding

Physical	Nominal Value	Unit	Test Method
Density		g/cm³	ISO 1183
Melt Mass-Flow Rate (MFR) (230°C/2.16 kg)		g/10 min	ISO 1133
Mechanical	Nominal Value	Unit	Test Method
Tensile Modulus		psi	ISO 527-2
Tensile Stress (Break)		psi	ISO 527-2
Tensile Strain (Break)		%	ISO 527-2
Flexural Strength		psi	ISO 178
Impact	Nominal Value	Unit	Test Method
Charpy Notched Impact Strength (73°F)		ft·lb/in²	ISO 179/1eA
Charpy Unnotched Impact Strength (73°F)		ft·lb/in²	ISO 179/1eU
Thermal	Nominal Value	Unit	Test Method
Heat Deflection Temperature (264 psi, Unannealed)		°F	ISO 75-2/A
Vicat Softening Temperature		°F	ISO 306/B
Melting Temperature		°F	ISO 11357-3
Flammability	Nominal Value	Unit	Test Method
Flame Rating - UL (0.0295 in)			UL 94
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: ALTECH® PP-H A 2020/159 GF20 CP, ALTECH PPH A 2020159 GF20 CP, ALTECH® PP-H , ALTECH PPH, ALTECH® PP:H, ALTECH® PP/H, ALTECH® PP+H, ALTECH® PP_H, ALTECH® PP H, ALTECHPPHA2020159GF20CP, ALTECHPPH, ALTECH PP_H, ALTECH PP H, PP HA 2020 159 GF 20 CP, ALTECHPP_H, A 2020, PP-HA 2020/159 GF20 CP, PPHA 2020159 GF20 CP, PP-HA 2020:159 GF20 CP, PP-HA 2020+159 GF20 CP, PP-HA 2020-159 GF20 CP, PP-HA 2020_159 GF20 CP, PP-HA 2020 159 GF20 CP, PP:HA 2020/159 GF20 CP, PP/HA 2020/159 GF20 CP, PP+HA 2020/159 GF20 CP, PP_HA 2020/159 GF20 CP, PP HA 2020/159 GF20 CP, PPHA, HA2020, PP-HA 2020, PPHA 2020, PP:HA 2020, PP/HA 2020, PP+HA 2020, PP_HA 2020, PP HA 2020, A 2020 159 GF 20 CP, PPHA2020159GF20CP, PPHA 2020_159 GF20 CP, PPHA 2020 159 GF20 CP, PP_HA 2020159 GF20 CP, PP HA 2020159 GF20 CP, PPHA2020, A 2020/159 GF20 CP, A 2020159 GF20 CP, A 2020:159 GF20 CP, A 2020+159 GF20 CP, A 2020-159 GF20 CP, A 2020_159 GF20 CP, A 2020 159 GF20 CP, A2020, 2020159, 159GF, GF20, 20CP, PPHA2020_159GF20CP, PP_HA2020159GF20CP, PP_HA2020, A2020159GF20CP, A2020_159GF20CP, Polypropylene, Unspecified, Polypropylene Unspecified, PP, Unspecified, PP Unspecified, Polypropylene, PP, Albis Euro, PolypropyleneUnspecified, PPUnspecified, 2020A, HAPP
Generic Name
Generic Name may also be described by the following terms: Polypropilene, Polypropelene.
Features
Features may also be described by the following terms: High Rigidity, Good Toughness, Tough.
Uses
Uses may also be described by the following terms: Housings, Housing.

Injection	Nominal Value	Unit
Processing (Melt) Temp		°F
Mold Temperature		°F

Notes

¹Typical properties: these are not to be construed as specifications.

ALTECH® PP-H A 2020/159 GF20 CP

Polypropylene

Glass Fiber Reinforcement, 20%

Supplied by Albis Plastic GmbH