IDES Prospector Already have an account? Login Here

IDES

ALTECH® PP-H A 2030/157 GF30 CP

Polypropylene

Glass Fiber Reinforcement, 30%

Supplied by Albis Plastic GmbH

The technical datasheet with complete property values for ALTECH® PP-H A 2030/157 GF30 CP is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
General  
Material Status 
  • Commercial: Active
Availability 
  • Asia Pacific
  • Europe
  • North America
Filler / Reinforcement 
  • Glass Fiber Reinforcement, 30% Filler by Weight
Additive 
  • Heat Stabilizer
Features 
  • Chemically Coupled
  • Heat Stabilized
  
Uses 
  • Electrical Parts
  • Housings
  
Processing Method 
  • Injection Molding
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ISO 1183
Melt Volume-Flow Rate (MVR) (230°C/2.16 kg)
in³/10min
 ISO 1133
Mechanical
Nominal Value
Unit
Test Method
Tensile Modulus
psi
 ISO 527-2
Tensile Stress (Break)
psi
 ISO 527-2
Tensile Strain (Break)
%
 ISO 527-2
Flexural Modulus
psi
 ISO 178
Flexural Strength
psi
 ISO 178
Impact
Nominal Value
Unit
Test Method
Charpy Notched Impact Strength (73°F)
ft·lb/in²
 ISO 179/1eA
Charpy Unnotched Impact Strength (73°F)
ft·lb/in²
 ISO 179/1eU
Thermal
Nominal Value
Unit
Test Method
Heat Deflection Temperature (264 psi, Unannealed)
°F
 ISO 75-2/A
Vicat Softening Temperature
°F
 ISO 306/B
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: ALTECH® PP-H A 2030/157 GF30 CP, ALTECH PPH A 2030157 GF30 CP, ALTECH® PP-H , ALTECH PPH, ALTECH® PP:H, ALTECH® PP/H, ALTECH® PP+H, ALTECH® PP_H, ALTECH® PP H, ALTECHPPHA2030157GF30CP, ALTECHPPH, ALTECH PP_H, ALTECH PP H, PP HA 2030 157 GF 30 CP, ALTECHPP_H, A 2030, PP-HA 2030/157 GF30 CP, PPHA 2030157 GF30 CP, PP-HA 2030:157 GF30 CP, PP-HA 2030+157 GF30 CP, PP-HA 2030-157 GF30 CP, PP-HA 2030_157 GF30 CP, PP-HA 2030 157 GF30 CP, PP:HA 2030/157 GF30 CP, PP/HA 2030/157 GF30 CP, PP+HA 2030/157 GF30 CP, PP_HA 2030/157 GF30 CP, PP HA 2030/157 GF30 CP, PPHA, HA2030, PP-HA 2030, PPHA 2030, PP:HA 2030, PP/HA 2030, PP+HA 2030, PP_HA 2030, PP HA 2030, A 2030 157 GF 30 CP, PPHA2030157GF30CP, PPHA 2030_157 GF30 CP, PPHA 2030 157 GF30 CP, PP_HA 2030157 GF30 CP, PP HA 2030157 GF30 CP, PPHA2030, A 2030/157 GF30 CP, A 2030157 GF30 CP, A 2030:157 GF30 CP, A 2030+157 GF30 CP, A 2030-157 GF30 CP, A 2030_157 GF30 CP, A 2030 157 GF30 CP, A2030, 2030157, 157GF, GF30, 30CP, PPHA2030_157GF30CP, PP_HA2030157GF30CP, PP_HA2030, A2030157GF30CP, A2030_157GF30CP, Polypropylene, Unspecified, Polypropylene Unspecified, PP, Unspecified, PP Unspecified, Polypropylene, PP, Albis Euro, PolypropyleneUnspecified, PPUnspecified, 2030A, HAPP
Generic Name
Generic Name may also be described by the following terms: Polypropilene, Polypropelene.
Features
Features may also be described by the following terms: Heat Stabilized, Heat-ageing Stabilized, Heat Ageing Stabilized, Heat-aging Stabilized, Heat Aging Stabilized.
Uses
Uses may also be described by the following terms: Housings, Housing.
Injection
Nominal Value
Unit
 
Processing (Melt) Temp
°F
  
Mold Temperature
°F
  
Notes
1Typical properties: these are not to be construed as specifications.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.